Abstract:So far, the research on topology optimization against noise has mainly addressed frequency-domain problems, while time-domain analysis is also widely used in practical engineering. Nonetheless, the topology optimization work on the latter was rarely reported due to its complexity. This paper presents a new topology optimization scheme of bi-material curved shell structure to reduce the time-domain noise generated by transient vibration. A finite element formulation for an eight-node curved shell element is presented. The Newmark integral method is employed to calculate transient responses, and the obtained results are input into the time-domain boundary element method to predict transient sound pressure. In the optimization model, the volumetric densities of material in a bi-material interpolation model constructed by the solid isotropic material with penalization (SIMP) model are chosen as the design variables; the time integral of the squared sound pressure on structural surfaces or prescribed reference points in acoustic medium over a specified time interval of interest is taken as the objective function; and the constraint on material volume is considered. A volume-preserving Heaviside penalization is introduced to suppress gray elements. Furthermore, the calculation of time-domain sound radiation sensitivity is transformed into the following two processes: (a) the derivation of transient response based on the Newmark integral method; (b) the derivation of transient sound pressure based on the discrete time-domain boundary integral equation. Numerical examples demonstrate the validity of the approach proposed in this paper. The influences of volume-preserving Heaviside penalization, volume constraint, loading position and form, and selection of objective function on the optimal design are discussed.This article is protected by copyright. All rights reserved.

Topology-Boundary Optimization of Coupled Structural-Acoustic Systems

A Subdivision-Based Combined Shape and Topology Optimization in Acoustics

Distribution Of Material Design For Acoustic-Structural Coupled Systems Using Topology Optimization Method

Minimization of Sound Radiation in Fully Coupled Structural-Acoustic Systems Using FEM-BEM Based Topology Optimization

Stiffeners layout design for noise reduction using topology optimization

Topology optimization of damping material layout in coupled vibro-acoustic system using hybrid finite element-wave based method

A Combined Shape and Topology Optimization Based on Isogeometric Boundary Element Method for 3D Acoustics

Topology Optimization Of A Constrained Layer Damping Plate Coupled With An Acoustical Cavity

A Microstructural Topology Optimization Approach for Vibro-Acoustic Interaction Systems Based on the Piecewise Constant Level Set Method

Topology Optimization of Sound Absorbing Layer for the Mid-Frequency Vibration of Vibro-Acoustic Systems

An Effective Approach for Topological Design to the Acoustic–structure Interaction Systems with Infinite Acoustic Domain

Acoustic Topology Optimization of a Truck Cab Based on Coupled Panel Contribution Analysis

Acoustic Design Optimization for Coupled Acoustic-Structural Systems

Topology Optimization of Acoustic–Mechanical Structures for Enhancing Sound Quality

Acoustic topology optimization of sound absorbing materials directly from subdivision surfaces with isogeometric boundary element methods

Acoustic Topology Optimization Of A Plate With Constrained Layer Damping Treatment Coupled With A Cavity

Topology Optimization of Dynamic Acoustic–mechanical Structures Using the Ersatz Material Model

TOPOLOGY OPTIMIZATION DESIGN FOR NOISE REDUCTION IN A TRUCK CAB INTERIOR

Topology optimization of bi‐material curved shell structures for minimizing time‐domain sound radiation

Topology optimization of damping layers for minimizing sound radiation of shell structures

Minimization of Sound Radiation from Vibrating Bi-Material Structures Using Topology Optimization