Abstract:The Nyquist wavelength-division multiplexing technique enable a solution to achieve high spectral efficiency in long-haul transmission system. Compare to polarization division multiplexing quadrature-phase-shift-keying, even high-level modulation scheme such as polarization division multiplexing 16-quadrature-amplitude-modulation is much more sensitive to intra-channel noise and inter-channel linear crosstalk caused by Nyquist wavelength-division multiplexing. We experimentally demonstrated the generation and transmission of the 6 × 128-Gb/s Nyquist wavelength-division multiplexing sixteen quadrature amplitude modulation signal over 1200-km single-mode fiber (SMF)-28 with Erbium-doped fiber amplifier only amplification with a net SE of 7.47 b/s/Hz, which is so far, to our knowledge, the highest SE for the signal with the bit rate above 100-Gb/s using the polarization-division multiplexing 16-quadrature-amplitude-modulation format. This experiment was successfully enabled by digital-signal-processing (DSP) pre-equalization of transmitter-side impairments and DSP post-equalization of the channel and receiver-side impairments. Nyquist-band is considered in the pre- equalization to enhance the tolerance of the polarization-division multiplexing 16-quadrature-amplitude-modulation to the aggressive spectral shaping. The bit error rate for each of the 6 channels is smaller than the limitation of the forward-error-correction limit of 3.8 ×10-3 after 1200-km SMF-28 transmission.

WDM Transmission of Single-Carrier 120-GBd ETDM PDM-16QAM Signals Over 1200-km Terrestrial Fiber Links

WDM Transmission of 16-Channel Single-Carrier 128-Gbaud PDM-16QAM Signals with 6.06 B/s/hz SE

Wdm Transmission Of Twelve 960 Gb/S Channels Based On 120-Gbaud Etdm Pdm-16qam Over 1200-Km Terawave (Tm) Fiber Link

Transmission of 200 G PDM-CSRZ-QPSK and PDM-16 QAM With a SE of 4 b/s/Hz

Transmission of Single-Carrier 400G Signals (5152-Gb/s) Based on 1288-Gbaud PDM QPSK over 10,130- and 6,078 Km Terrestrial Fiber Links

30-Tb/s (3×12.84-Tb/s) signal transmission over 320km using PDM 64-QAM modulation

Transmission of single-carrier 400G signals (515.2-Gb/s) based on 128.8-GBaud PDM QPSK over 10,130- and 6,078 km terrestrial fiber links.

Generation and Transmission of High Symbol Rate Single Carrier Electronically Time-Division Multiplexing Signals

WDM Transmission of 108.4-Gbaud PDM-QPSK Signals (40×433.6-Gb/s) over 2800-Km SMF-28 with EDFA Only

Generation And Transmission Of Electronically Time-Division Multiplexing High Baud Single Carrier Signals

6 128-Gb/s Nyquist-WDM PDM-16QAM Generation and Transmission Over 1200-km SMF-28 With SE of 7.47 b/s/Hz

6$\,\Times\,$ 128-Gb/s Nyquist-WDM PDM-16QAM Generation and Transmission over 1200-Km SMF-28 with SE of 7.47 B/s/hz

82.29-Tb/s (182x560-Gb/s) Transmission of 42GHz-Spaced WDM PDM-128-QAM OFDM Signals over 100-km SMF

Generation Of 153.6gbaud (614.4gbps) Pdm-Qpsk Signals And Transmission Of Over 1200km Smf-28 With Edfa-Only Amplification

1.76Tb/s Nyquist PDM 16QAM signal transmission over 714km SSMF with the modified SCFDE technique.

7 $\,\times\,$ 224 Gb/s/ch Nyquist-WDM Transmission over 1600-Km SMF-28 Using PDM-CSRZ-QPSK Modulation

Field Transmission of 100 G and Beyond: Multiple Baud Rates and Mixed Line Rates Using Nyquist-WDM Technology

64-Tb/s, 8 B/s/hz, PDM-36QAM Transmission over 320 Km Using Both Pre- and Post-Transmission Digital Signal Processing

515 Gb/s, 10.31 B/s/hz, Optical PDM-128-QAM Nyquist Signal Transmission over 155-Km SSMF

Experimental Demonstration of PDM-32QAM Single-Carrier 400G over 1200-Km Transmission Enabled by Training-Assisted Pre-Equalization and Look-Up Table

8×506-Gb/s 16QAM WDM Signal Coherent Transmission over 6000-Km Enabled by PS and HB-CDM