Abstract:Despite recent advances in leak detection in water supply systems, previous studies focused mainly on material aspects or orifice opening characteristics. This study evaluated geometric, hydraulic, and hydrodynamic factors influencing on water leaks using three-dimensional (3D) computational fluid dynamics (CFD) simulations. The simulated discharge coefficient (C-d) had a maximum absolute deviation of 8% compared with experimental data. The results indicated that the variation of C-d as a function of the diameter and orifice size can be attributed to the effect of tube curvature on flow convergence through the orifice. The statistical analysis concluded that the orifice-to-pipe diameter ratio d/D is the best dimensionless parameter that explains this phenomenon, which agreed with the analyses of the streamlines and turbulent eddy dissipation rate in the simulations. Other important dimensionless parameter are the ratio of the pressure head differential at the orifice to the pipe diameter Delta H/D, Reynolds number (R), and the ratio of the pressure head differential at the orifice to the wall thickness Delta H/e, in order of relevance. A set of empirical correlations was elaborated through a nonlinear multiple regression analysis with Reynolds numbers ranging between 12,000 and 52,000, and pressure head differential ranging from 1 to 45 m. This study advances the knowledge of cross-flows through orifices, and the proposed correlations potentially can improve the prediction of water leaks in pipes. (c) 2023 American Society of Civil Engineers. Practical Applications: This study demonstrates the applicability of computational fluid dynamics simulations for understanding the leakage phenomenon in pipes, and obtained a set of empirical correlations that potentially can improve the prediction of leakages in water distribution systems. The authors propose an equation for estimating the discharge coefficient in practical applications. This equation balances the number of terms (three dimensionless coefficients) and accuracy (R-2 = 98%). Although it is dimensionless, the correlation must be used within the established ranges of values to ensure its effectiveness: Reynolds numbers from 12,000 to 52,000, and pressure head differentials from 1 to 45 m.

Entropy-viscosity Based LES of Turbulent Flow in a Flexible Pipe

Pressure-balanced Saint–Venant Equations for Improved Asymptotic Modelling of Pipe Flow

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Semi-analytical Solution for Dynamic Behavior of a Fluid-Conveying Pipe with Different Boundary Conditions

Viscoelastic flow in rotating curved pipes

Coupling Analysis Of Fluid-Structure Interaction In Fluid-Filled Elbow Pipe

Computational Simulation of the Flow Induced by Water Leaks in Pipes

Large Eddy Simulations of Turbulent Pipe Flows At Moderate-To-High Reynolds Numbers

Electrification hazard of turbulent pipe flow: Theoretical approach and numerical simulation

LES-informed resolvent-based estimation of turbulent pipe flow

Turbulent Flow Simulation Using Large Eddy Simulation Combined with Characteristic-Based Split Scheme

Large eddy simulations of turbulent pipe flows at moderate Reynolds numbers

LES of Turbulent Flow of The Non-Newtonian Fluid: The Turbulence Statistics

The Flow Dynamics of the Garden-Hose Instability

SPH simulations of turbulent flow in curved pipes with different geometries. A comparison with experiments

Geometrically exact model and dynamics of cantilevered curved pipe conveying fluid

Modeling of liquid-solid flow erosion in curved pipes of gradually varying cross section

Modeling of low Mach number unsteady turbulent pipe flows

Vibrations of a vertical 90° pipe bend under two-phase flow conditions

Turbulent dynamics of pipe flow captured in a reduced model: puff relaminarisation and localised `edge' states

Prediction of Mean Turbulent Flow Velocity in a Permeable-Walled Pipe