Abstract:Carbon nanotube film (CNTF) interlayer toughened carbon fiber (CF) reinforced epoxy resin (EP) hybrid composites were fabricated via resin transfer molding (RTM) processing in this paper. Multi-walled carbon nanotubes were prepared by chemical vapour deposition, and carbon nanobute films were prepared through vacuum filtration. Model I interlaminar fracture toughness G(IC) of laminates and model II interlaminar fracture toughness G(IIC) of laminates are used to characterize the fracture toughness. of the RTM laminates. Furthermore, the toughening mechanism is discussed through microstructure of the fracture surface combining mechanical properties. The compact degree of the carbon nanotube films was influenced by the ratio of the multi-walled carbon nanotubes, which led to different impregnation of the carbon nanobute films to the epoxy resin. Experimental results indicated that the carbon nanotube films from carbon nanotubes of large aspect ratios exhibited better impregnation effect than those films from carbon nanotubes of small aspect ratios. The carbon nanotube films intercalated in the interlayer of the composites between the carbon fiber and the matrix resin as a whole laminated structure, and they still kept a continuous grid structure in the CNTF/CF/EP hybrid composites. As to the model I interlaminar fracture toughness G(IC) of laminates,the carbon nanotube films have no obvious improvement on the G(IC) value. However, the carbon nanotube films laid between the carbon fiber layers changed the failure mode of the CF/EP composites, leading to increased initial failure load and breaking load. As to model II interlaminar fracture toughness G(IIC) of laminates, experimental results exhibited that the reinforcing efficacy on the sliding mode shear failure was remarkably increased for the CNTF/CF/EP hybrid composites. Model II interlaminar fracture toughness G(IIC) of laminates has increased from 1292 J/m(2) of the CF/EP to 2869 J/m(2) of the CNTF/CF/EP hybrid composites. There is 120% amplification in G(IIC) testing value. Microstructures of the CF/EP composites and the CNTF/CF/EP hybrid composites were characterized through scanning electron microscope (SEM) for understanding the prominent improvement on the toughening properties. SEM pictures showed that there was strong shear history of the carbon nanotube films via the sliding mode failure. The carbon nanotubes absorbed a great deal of energy through shear sliding and hindered crack growth,leading to increase of the G(IIC) value outstandingly.

Delamination toughening of carbon fiber/epoxy laminates by hierarchical carbon nanotube-short carbon fiber interleaves

Interlaminar toughening in carbon fiber/epoxy composites interleaved with CNT-decorated polycaprolactone nanofibers

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

Improvement of Interlaminar Fracture Toughness in Carbon Fiber/epoxy Composites with Carbon Nanotubes/polysulfone Interleaves

Synergistic toughening on CFRP via in-depth stitched CNTs

Study of Synergistic and Competitive Mechanisms on Toughening Cfrp Composites with Intrinsic and Extrinsic Multiscale Interleaves

Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films

Interlaminar fracture toughness of carbon/epoxy composites laminates toughened by short carbon fiber

Preparation carbon nanotube-decorated carbon fibers under low pressure for epoxy-based unidirectional hierarchical composites with enhanced interlaminar shear strength

Controllable Delamination of CNT-Reinforced Carbon Fiber Films by Harnessing Mechanical and Topological Characteristics of the Composites

Electrothermally Self-Healing Delamination Cracks in Carbon/Epoxy Composites Using Sandwich and Tough Carbon Nanotube/Copolymer Interleaves

High crack self-healing efficiency and enhanced free-edge delamination resistance of carbon fibrous composites with hierarchical interleaves

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Maximizing Interlaminar Fracture Toughness in Bidirectional GFRP through Controlled CNT Heterogeneous Toughening

CARBON NANOTUBE FILM INTERLAYER TOUGHENED CARBON FIBER REINFORCED EPOXY RESIN HYBRID COMPOSITES

Hierarchical toughening and self-diagnostic interleave for composite laminates manufactured from industrial carbon nanotube masterbatch

Synergistic Improvement of Electrical Conductivity and Interlaminar Toughness of Carbon Fiber Resin Matrix Composites Based on Intercalation Method

Effect of Interfacial Transition Layer with CNTs on Fracture Toughness and Failure Mode of Carbon Fiber Reinforced Aluminum Matrix Composites

Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils

Establishment of Interlaminar Structure and Crack Propagation in Carbon Fiber Reinforced Epoxy Composites by Interleaving CNTs/PEK-C Film