Abstract:The most critical aspect in the assembly of phosphor-converted white light-emitting diodes (pc-WLEDs) is how to stabilize the device in a practical environment. The high applied currents can generate enormous heat up to more than 100 °C, and such a continuous illumination process will lead to serious effects concerning the stability of the device. Therefore, the new search for examples to fully suppress thermal quenching effect is a real challenge. In this study, a novel Eu3+-activated CaMgGeO4 (CMGO) phosphor of olivine type is developed via a conventional solid-state reaction. The results reveal that Eu3+ occupies the low symmetric Ca2+ site of this host. Upon visible-light sensitization at 464 nm, a dominant red emission band with maximum at 612 nm is witnessed. Its full width at half-maximum (fwhm) is merely ∼4.37 nm, and a high color purity of around 94% is achieved. Their corresponding Commission Internationale de L'Eclairage (CIE) coordinates are very close to standard red color coordinates (0.666, 0.333). The influence of concentration and temperature on the optical property has been explored. It has been discovered that the optimized sample (CMGO:0.01Eu3+) is not influenced by the thermal quenching effect and its fluorescent intensity is improved even up to 473 K, which is mainly attributed to the incorporation of abundant trap sites generated by the nonequivalent substitution Eu3+ for Ca2+. After it is integrated into commercially available YAG:Ce3+ phosphor-based pc-WLEDs, the excellent optical parameters of the fabricated WLEDs are evaluated. The correlated color temperature (CCT) varies from cool white (6458 K) to warm (4370 K), and the color rendering index (CRI) increases from 78 to 86 under a high flux operating current of 200 mA. Furthermore, the chromaticity coordinates remain almost stable with the increasing drive current from 200 mA to 1000 mA. It is highly expected that CaMgGeO4:0.01Eu3+ will become a suitable red phosphor for the preparation of white LEDs with high efficiency.

The Rate Equation Based Optical Model for Phosphor-Converted White Light-Emitting Diodes

Novel Measurement System and Analytical Method for White LED Phosphors

Optical Model of Laminated Remote Phosphor Films and Its Application in White LED

Study on the Performance of Deep Red to Near-Infrared pc-LEDs by the Simulation Method Considering the Distribution of Phosphor Particles

A Fluorescein-Centered Polymer As a Phosphor for Fabricating Pure White Light-Emitting Diodes

Characterization, packaging, and optical model of single-primary color phosphor thin films and LEDs

Effect of particle sizes and mass ratios of a phosphor on light color performance of a green phosphor thin film and a laminated white light-emitting diode

Efficient Energy Transfer from Trap Levels to Eu3+ Leads to Antithermal Quenching Effect in High-Power White Light-Emitting Diodes

Research on Scattering Properties of Phosphor for High Power White Light Emitting Diode Based on Mie Scattering Theory

Design efficient energy transfer Ca2Al2SiO7: Bi3+, Eu3+ phosphors by cationic substitution for full-spectrum W-LED lighting

Simulation of optical behavior of YAG:Ce3+@SiO2 phosphor used for chip scale packages WLED

Measurement model of circadian action factor of phosphor-converted white LEDs based on photometric, electrical, and thermal properties

Opto-thermal simulation model for optimizing laser-excited remote phosphor systems

Efficient Solution-Processed Phosphor-Sensitized Single-Emitting-layer White Organic Light-Emitting Devices: Fabrication, Characteristics, and Transient Analysis of Energy Transfer

White-Light Emission From A Single-Emitting-Component Ca9gd(Po4)(7):Eu2+,Mn2+ Phosphor With Tunable Luminescent Properties For Near-Uv Light-Emitting Diodes

Selecting the optimal synthesis parameters of InP/CdxZn1-xSe quantum dots for a hybrid remote phosphor white LED for general lighting applications

Development of thermally-stable red-emitting lead-free double-perovskite phosphors with an internal PLQY approaching 100%

Efficient Perovskite White Light-Emitting Diode Based on an Interfacial Charge-Confinement Structure

Characterization and Measurement of White LED Phosphors

Influence of Phosphor Particle Size on Visual and Non-Visual Performances of White Light-Emitting Diodes for General Lighting

Electronic structure, colour-tunable emission and energy transfer in Li3Ba2Y3(WO4)8:Bi3+,Eu3+ phosphors for white light-emitting diodes