Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

Study on the Electron Emission Process of the Pseudospark During the Hollow Cathode Phase under Nanosecond Pulsed Voltage

Experimental Study of the Electric Pulse-Width Effect on the Acoustic Pulse of a Plasma Sparker

Simulation of pulsed electron-beam emission from a triggered multi-gap pseudospark device

Characteristic Study on Pseudospark Pulsed Electron Beam Transfer

Fast breakdown process and characteristics diagnosis of nanosecond pin-pin discharge

Electrical and optical studies of a pseudo-spark switch

Characterization of Pseudospark Discharge-Based Multigap Plasma Cathode Electron Source for the Generation of Short Pulsed Energetic Electron Beam

Electric characteristics of pseudo-spark during breakdown phase

Experimental study of atmospheric pressure single-pulse nanosecond discharge in pin-to-pin configuration

Kinetic Simulations of Hollow Cathode Discharge and Its Interactions With Different Target Materials

Formation of diffuse and spark discharges between two needle electrodes with the scattering of particles

Breakdown, Discharge Modes, and Gaseous Recovery of Atmospheric Air with Repetitive 10 Ns Pulses

Observation of electron runaway in a tip-plane air gap under negative nanosecond pulse voltage by PIC/MCC simulation

Nanosecond Repetitively Pulsed Discharge of Point–Plane Gaps in Air at Atmospheric Pressure

Generation and application of pseudospark-sourced electron beams

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

Pseudospark-sourced beam and its application in high-power millimeter-wave generation

An Investigation into the Mechanism of Pseudospark Producing Metal Ion Beams

Influence factors and improvement scheme on the breakdown behavior of pseudospark switch

Nanosecond-Pulse Gliding Discharges Between Point-To-Point Electrodes in Open Air

Experimental Research of ZnO Surface Flashover Trigger Device of Pseudo-Spark Switch