Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Effect of Carbon Fiber Surface Modification on the Mechanical Properties of Carbon-Fiber-Reinforced Ultrahigh-Molecular-Weight Polyethylene Composite

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Selective laser sintering of functionalized carbon nanotubes and inorganic fullerene-like tungsten disulfide reinforced polyamide 12 nanocomposites with excellent fire safety and mechanical properties

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Influence of surface modification of carbon fiber based on magnetron sputtering technology on mechanical properties of carbon fiber composites

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Effect of Surface Treatment of Carbon Fiber on the Mechanical Properties of C-f/SiO2 Composite

A Surface Modification of Polylactic Acid Composites for Additive Manufacturing with Modified Chopped Carbon Fiber and Modified Nano‐hydroxyapatite

Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting

Preparation of short carbon fiber reinforced photosensitive resin and composite material properties study

Surface Modification of Carbon Fiber by Electro-Polymerization: Continuous Production, Thickness Control, Colorization, and Preparation of CFRP

STUDY ON THE MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED CASTING NYLON

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Preparation of CNTs/SCF reinforcement using multiple continuous surface treatments to achieve synergistic improvement of epoxy resin-based composites interfacial properties: Towards industrial production of carbon fiber surface treatment

Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling

Interfacial adhesion between carbon fibers and nylon 6: Effect of fiber surface chemistry and grafting of nano-SiO2