Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

Robustness of Various Metals Against High Thz Field Induced Damage

Heavy Radiation Damage in Alpha Zirconium at Cryogenic Temperature: A Computational Study

Damage threshold in pre-heated materials exposed to intense X-rays

Nanoscale Origins of the Damage Tolerance of the High-Entropy Alloy CrMnFeCoNi

The Temperature-Dependent Strength of Metals: Theory and Experimental Validation

Molecular dynamics simulations of high-energy radiation damage in hcp-titanium considering electronic effects

Damage threshold evaluation of thin metallic films exposed to femtosecond laser pulses: The role of material thickness

Rate dependence of damage formation in metallic-intermetallic Mg-Al-Ca composites

Development of low-temperature impact-damage tolerant high entropy alloy with sequential multi-deformation mechanisms

Electronic effects on the radiation damage in high-entropy alloys

Threshold damage mechanisms in brittle solids and their impact on advanced technologies

Plasma and X-ray radiation-induced damage mechanisms in a tungsten heavy alloy

Temperature Dependence of Meso Constitutive Parameters for Advanced High-Strength Steel

Metals strengthen with increasing temperature at extreme strain rates

A Unified Phase Field Damage Model for Modeling the Brittle-Ductile Dynamic Failure Mode Transition in Metals

Numerical Simulation of Metal Sheet Damage under High-Speed Tangential Airflow and Laser Irradiation

Systematic study of displacement threshold and the near-threshold primary radiation damage model

Dynamic Failure Simulation of Metal Materials and Structures under Blast and Impact Loading

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Fracture Strength of the Particulate-Reinforced Ultra-High Temperature Ceramics Based on A Temperature Dependent Fracture Toughness Model

Theoretical Combined Experimental Study of Unique He Behaviors in High-Entropy Alloys