Abstract:The size and the character (low and large angle, special boundaries, tilt and twist boundaries, twins) of the grain boundaries (GBs) in polycrystalline materials influence their strength and their fracture toughness. Recent studies devoted to nanocrystalline (NC) materials have shown a deviation from the Hall-Petch law. Special GBs formed by Σ3 twins in face-centred cubic metals are also known to have a strong effect on the mechanical behaviour of these metals, in particular their work-hardening rate. Grain orientation influences also crack path, the fracture toughness of body-centred cubic (BCC) metals and the fatigue crack growth rate of microstructurally short cracks. This paper deals both with slip transfer at GBs and with the interactions between propagating cracks with GBs. In the analysis of slip transfer, the emphasis is placed on twin boundaries (TBs) for which the dislocation reactions during slip transfer are analysed theoretically, experimentally and using the results of atomic molecular simulations published in the literature. It is shown that in a number of situations this transfer leads to a normal motion of the TB owing to the displacement of partial dislocations along the TB. This motion can generate a de-twinning effect observed in particular in NC metals. Crack propagation across GBs is also considered. It is shown that cleavage crack path behaviour in BCC metals is largely dependent on the twist component of the GBs. A mechanism for the propagation of these twisted cracks involving a segmentation of the crack front and the existence of intergranular parts is discussed and verified for a pressure vessel steel. A similar segmentation seems to occur for short fatigue cracks although, quite surprisingly, this crossing mechanism for fatigue cracks does not seem to have been examined in very much detail in the literature. Metallurgical methods used to improve the strength of the materials, via grain boundaries, are briefly discussed.

Grain and interface boundaries governed strengthening mechanisms in metallic multilayers

Grain Boundary Dominated Plasticity in Metallic Materials

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Inclination-governed Deformation of Dislocation-Type Grain Boundaries

Coordinated grain boundary deformation governed nanograin annihilation in shear cycling

Effects of Anisotropy and In-Plane Grain Boundary in Cu/Pd Multilayered Films with Cube-on-Cube and Twinned Interface

The hardening and softening mechanism governed by GB stability in nanograined metals: A molecular dynamics study

Interfacial Structures Governed Plastic Deformation Behaviors in Metallic Multilayers

Supermodulus Effect by Grain-Boundary Wetting in Nanostructured Multilayers

Influences of Symmetric Tilt Grain Boundary on the Stretching Deformation Behaviors of Cu Bicrystals

Intersectant Coherent Twin Boundaries Governed Strong Strain Hardening Behavior in Nanocrystalline Cu

Ultra-high Strength and Plasticity Mediated by Partial Dislocations and Defect Networks: Part I: Texture Effect

Investigation of Grain Boundary and Orientation Effects in Polycrystalline Metals by a Dislocation-Based Crystal Plasticity Model

Grain boundary decohesion in body-centered cubic Mg-Li-Al alloys

Synergistic grain boundary engineering for achieving strength-ductility balance in ultrafine-grained high-Cr-bearing multicomponent alloys

Crossing grain boundaries in metals by slip bands, cleavage and fatigue cracks

Structure and stability of Σ3 grain boundaries in face centered cubic metals

Theoretical Prediction of Strengthening in Nanocrystalline Cu with Multi-Element Grain Boundary Segregation Decoration

Strong and Plastic Metallic Composites with Nanolayered Architectures

Interaction Between Dislocation and Heterogeneous Interface in Cu/Fe Laminated Composites Based on Discrete Dislocation Dynamics

Mechanical Behavior and Thermal Stability of Nanocrystalline Metallic Materials with Thick Grain Boundaries