Abstract:Cracking at phase or grain boundaries has been demonstrated as the dominant failure mode in Mg alloys, emphasizing the necessity for boundary enhancement to improve both the strength and ductility of the alloy. However, producing strongly bonded twin boundaries in Mg alloys is challenging. Therefore, a novel method to enhance the bonding between intermetallics and the matrix was proposed in this work by forming semi-coherent boundaries. Utilizing transmission electron microscopy (TEM), a previously unexplored intermetallic compound (IMC), Al8Mn4Y, has been identified and systematically investigated. The orientation relationship between lattices of Al8Mn4Y and Mg matrix revealed that the angle between {0 1 ‾ 0}Al8Mn4Y and {000 1 ‾ }α-Mg planes is only 3.9°. Furthermore, typical lattice mismatches were observed in every four Al8Mn4Y lattices along the <010>Al8Mn4Y direction at the bonding interface, demonstrating their semi-coherent relationship. Subsequently, the mechanical properties of Al8Mn4Y were measured using nanoindentation, and the corresponding impact of Y-containing intermetallics on the mechanical properties of the alloy was also evaluated through tensile tests and fracture analyses. The results revealed that the refinement of conventional intermetallics originally present in the alloy, in conjunction with the newly generated Y-containing particles and the resulting semi-coherent boundaries following the addition of Y, effectively alleviated the stress concentrations and reduced cracking at phase and grain boundaries, contributing to the simultaneous enhancement of both strength and ductility in Mg alloys. Ultimately, the effects of Y on the elastic and plastic deformation of Mg alloys were quantified using four individual contributions, and the mechanisms responsible for the concurrent augmentation of strength and ductility were elucidated, offering valuable insights into the design strategies for future Mg alloys.

Grain boundary decohesion in body-centered cubic Mg-Li-Al alloys

Enhancing Plasticity in BCC Mg-Li-Al Alloys Through Controlled Precipitation at Grain Boundaries

Grain Boundary Dominated Plasticity in Metallic Materials

Molecular Dynamics Study of Grain-Boundary-Induced Melting in B2nial Using A Many-Body Potential

Deformation and Fracture Mechanisms of an Annealing-Tailored "bimodal" Grain-Structured Mg Alloy

Exploring the mechanism of plastic deformation in BCC Mg-Li-Al alloys via Machine learning Molecular dynamics simulations

Atomistic simulation of the dislocation interactions with the Al 2 Ca Laves phase in Mg–Al–Ca alloy

Effect of Cu and Mg co-segregation on the strength of the Al grain boundaries: A molecular dynamics simulation

Structural and crystallographic characterization of grain boundaries coarse particles in an Al–Mg–Si alloy, using convergent beam electron diffraction

Investigation of Grain Boundary Content on Crack Propagation Behavior of Nanocrystalline Al by Molecular Dynamics Simulation

Plastic deformation response during crack propagation in Mg bicrystals with twin boundaries

Achieving high strength via solutes co-clustering and solvents redistribution in an ultralightweight BCC magnesium alloy

Atomic-scale investigation on the structures and mechanical properties of metastable grain boundaries in aluminum

Molecular dynamics simulation of grain boundary geometry on crack propagation of bi-crystal aluminum

Effects of the morphology of grain boundary α-phase on the anisotropic deformation behaviors of additive manufactured Ti–6Al–4V

Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals

Synergistic grain boundary engineering for achieving strength-ductility balance in ultrafine-grained high-Cr-bearing multicomponent alloys

Role of and dislocations on the room-temperature grain boundary migration in a deformed Mg alloy

Effects of Grain Boundaries on the Radiation-Induced Defects Evolution in BCC Fe–Cr Alloy: A Molecular Dynamics Study

Evolution of Deformation Substructure and MgxZnyCaz Metastable Phase in Fine-Grained Mg Alloys

Strengthening mechanisms of semi-coherent boundaries between Al8Mn4Y and the Mg matrix in magnesium alloys