Abstract:The conventional fixed acoustic sensors leak detection methods have been demonstrated to be very practical for locating leakages in water distribution pipelines. However, these methods demand proper installation of sensors, and therefore cannot be implemented on buried long water distribution pipelines for condition assessment, early leak detection, and the estimation of leak size effect. Due to these limitations, a free-swimming device is developed. The free-swimming device with the potential of high acoustic sensitivity is capable of detecting the small underwater leakages in the plastic water-filled pipes. Despite the fact that a number of factors influence the underwater acoustic signals, such as water flow noise. Therefore, the interpretation of the leakage and influence of leakage size is considerably challenging from the underwater measured signals. The new method is proposed for reliable leakage detection by tuning the wavelet transform to underwater water acoustic signals. In this method, firstly, Short-Time Fourier Transforms (STFT) of underwater acoustic signals over a relatively long time-interval is monitored to capture the leakage-signals signature. The captured signals efficiently lead in the selection of mother wavelet (tuned wavelet) for the excellent signal localization in the time-frequency domain. Finally, the acoustic signals are analyzed in the tuned wavelet transform to detect the events. In this paper, the practical application of the proposed method, the controlled experiments are designed, and acoustic signals are collected from an experimental setup by launching the free-swimming device. The measured acoustic signals are used to identify the leakage-signals signature from unwanted interfering signals (instantaneous pipe vibrations, water flow noise, pipe's natural frequencies, and background noise). The evaluation of results validated that the free-swimming device and the tuned wavelet transform together can efficiently lead to reliable underwater leakage detection, as well as the influence of the leakage size in plastic water-filled pipes.

Underwater Cable Shape Detection Using ShapeTape

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

Study of a Novel Underwater Cable with Whole Cable Monitoring

Dual-probe Type Submarine Cable Routing and Depth Detection System Design

Detection and Tracking of an Underwater Target Using the Combination of A Particle Filter and Track-Before-Detect

Application of image processing technology in cable detection of underwater robot

Shape monitoring method of submarine cable based on fiber Bragg grating

Automatic Tracking Method for Submarine Cables and Pipelines of AUV Based on Side Scan Sonar

3-D Shape Recovery of Planar and Curved Surfaces from Shading Cues in Underwater Images

Distributed shape detection for an acoustic sensitive optical cable with DAS

Precise Cable Contour Extraction Method Based on Candidate Point Merge Search

Submarine Cable Detection Method Based on Multisensor Communication

Underwater cable detection in the images using edge classification based on texture information

The Sensing Performance of a Novel Optical Cable for Tunnel Water Leakage Monitoring Based on Distributed Strain Sensing

The Free-Swimming Device Leakage Detection in Plastic Water-filled Pipes Through Tuning the Wavelet Transform to the Underwater Acoustic Signals

Prediction-Based Submarine Cable-Tracking Strategy for Autonomous Underwater Vehicles with Side-Scan Sonar

A Novel Approach for Cable Tension Monitoring Based on Mode Shape Identification

Nonlinear RANSAC with crossline correction: An algorithm for vision-based curved cable detection system

Attitude-Independent Route Tracking for Subsea Power Cables Using a Scalar Magnetometer under High Sea Conditions