Abstract:Experimental and numerical analysis of the drop-on-demand inkjet was conducted to determine the jetting characteristics and meniscus motion under the control of the ink supply pressure. A single transparent nozzle inkjet head driven by a piezoelectric actuator was used to eject droplets. To control ink supply pressure, the pressure of the air in the reservoir was regulated by a dual valve pressure controller. The inkjet performance and the motion of the meniscus were evaluated by visualization and numerical simulation. A two-dimensional axisymmetric numerical simulation with the dynamic mesh method was performed to simulate the inkjet dynamics, including the actual deformation of the piezoelectric actuator. Numerical simulation showed good agreement with the experimental results of droplet velocity and volume with an accuracy of 87.1%. Both the experimental and simulation results showed that the drop volume and velocity were linearly proportional to the voltage change. For the specific voltages, an analysis of the effect of the ink supply pressure control was conducted. At the maximum negative pressure, -3 kPa, the average velocity reductions were 0.558 and 0.392 m/s in the experiment and simulation, respectively, which were 18.7 and 11.6% less than those of the uncontrolled case of 0 kPa. Therefore, the simulation environment capable of simulating the entire inkjet dynamics, including meniscus movement regarded to be successfully established. The average volume reductions were 18.7 and 6.97 pL for the experiment and simulation, respectively, which were 21.7 and 9.17% less than those of the uncontrolled case. In the results of the meniscus motion simulation, the damping of the residual vibration agreed well with the experimental results according to the ink supply pressure change. Reducing the ink supply pressure reduced the speed and volume, improved the damping of residual vibrations, and suppressed satellite drops. Decreasing ink supply pressure can be expected to improve the stability and productivity of inkjet printing.

Dynamic Analysis of Squeeze Piezo Printhead Using Reduced Frequency Model

Modelling of Power-Law Fluid Flow Inside a Piezoelectric Inkjet Printhead

A Multi-Fidelity Model for Simulations and Sensitivity Analysis of Piezoelectric Inkjet Printheads

Optimization of the Driving Waveform of a Piezoelectric Inkjet Printhead Based on a System Dynamics Model

Squeeze-Type Piezoelectric Inkjet Printhead Actuating Waveform Design Method Based on Numerical Simulation and Experiment

Droplet Jetting of Piezoelectric Printhead and Corresponding Effect Factors

A method to estimate the transient fluid pressure of a piezoelectric inkjet printer using system dynamic analysis

Design and Fabrication of A Piezoelectric Bend Mode Drop-On-Demand Inkjet Printhead with Interchangeable Nozzle

Selective Evaporation at the Nozzle Exit in Piezoacoustic Inkjet Printing

The Effect of Ink Supply Pressure on Piezoelectric Inkjet

Design and simulation of a hybrid inkjet printhead for ejecting high viscous inks

A Novel High-Dpi and Monodisperse Droplet Inkjet Printhead with the Piezoelectric Cutter

Influences of Excitation on Dynamic Characteristics of Piezoelectric Micro-Jets

Effects of dwell time of excitation waveform on meniscus movements for a tubular piezoelectric print-head: experiments and model

A Versatile Approach to Numerically Investigate the Trapped Air Bubble in Piezoelectric Inkjet Printing Process

Injection of Viscous Micro-Droplet via Nozzle-Driven Piezoelectric Micro-Jet and Its Performance Control Method

Resonance behavior of a compliant piezo-driven inkjet channel with an entrained microbubble

Actuating Voltage Waveform Optimization of Piezoelectric Inkjet Printhead for Suppression of Residual Vibrations

Design and Fabrication of a PET/PTFE-based Piezoelectric Squeeze Mode Drop-on-demand Inkjet Printhead with Interchangeable Nozzle

Nozzle-Driven Self-Priming Piezoelectric Inkjet Based on Capillary Action for Variable Angle Printing

Residual Vibration Suppression of Piezoelectric Inkjet Printing Based on Particle Swarm Optimization Algorithm