Abstract:As well known, sustainability issues represented by the environment and resource protection have been paid close attention nowadays. Natural fiber has been an increasing interest and promising as reinforcing fiber in polymeric composites due to its low density, cost, acceptable specific strength and biodegradation. Even though, the principle challenge for natural fibers used as reinforcement is their internal strong water-absorption ability when the exposed in wet and water environment. Long-term hydrothermal degradation behavior of Glass reinforced composite (GFRP) and jute reinforced composite (JFRP) have been discussed in previous study on the basis of the great amount of physical and mechanical testing results. As former working reported, gained water content increases linearly against the square root of aging time followed by gradual increase trend in longer duration both in JFRP and GFRP. In particularly, JFRP’s weight loss performance occurred earlier with higher value compared to GFRP. However, water absorption and weight loss mechanism, relationship between weight change and retention of mechanical property for JFRP didn’t report and illustrate clearly and extensively. Therefore, in order to figure it out comprehensively, the current study was focus on hydrothermal ageing mechanism and corresponding degraded mechanical behavior. Firstly, 2 layers of deeply dried and natural dried jute woven fabric reinforced unsaturated polyester were fabricated by hand-layup method. The cut samples were immersed into 80°C hot water bath for predetermined durations and inspected by ultrasonic wave. Afterwards, 3-point bending test with acoustic emission (AE) measurement was carried out for aged samples. The weight change mechanism, evolution of internal deterioration and mechanical property along with ageing time was investigated. The result indicated that JFRP can absorb water easily and quickly compared with GFRP owing to jute fiber’s hydroscopic nature. Weight loss was caused as a result of resin particle loss and pectin dissolution from the developed micro-crack owing to hydrothermal water environment. What’s more, internal serious deterioration occurred after 24 hours immersion leading to larger reduction of mechanical property.

Monitoring of Seawater Immersion Degradation in Glass Fibre Reinforced Polymer Composites Using Quantum Dots

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

In-Situ Monitoring of Curing and Ageing Effects in Frp Plates Using Embedded Fbg Sensors

Dual In-Situ Water Diffusion Monitoring of GFRPs based on Optical Fibres and CNTs

The Coupling Effects of Seawater Aging and Fatigue Micro-Crack on Mechanical Degradation of Carbon Fiber/epoxy Plain Woven Composites

Mechanical Degradation and Failure Analysis of Different Glass/Basalt Hybrid Composite Configuration in Simulated Marine Condition

Hygrothermal aging effect on the water diffusion in glass fiber reinforced polymer (GFRP) composite: Experimental study and numerical simulation

Effect of seawater and stress coupling on the durability of carbon fibre-reinforced polymer

Influence of Hygrothermal Aging on the Durability and Interfacial Performance of Pultruded Glass Fiber-Reinforced Polymer Composites

Experimental Study on the Mechanical Properties of CFRP/epoxy Composite Plates under Seawater Immersion

Understanding seawater-induced fatigue changes in glass/epoxy laminates: A SEM, EDS, and FTIR study

Analytical approach for crack identification of glass fiber reinforced polymer-sea sand concrete composite structures based on strain dissipations

Self-reporting damage and enhancing interfacial properties of carbon fiber composites via self-assembly host-guest mechanochromic fluorescent probe

An Embedded Non-Intrusive Graphene/epoxy Broadband Nanocomposite Sensor Co-Cured with GFRP for in Situ Structural Health Monitoring

Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water

Experimental investigation of long-term performance of fiber-reinforced epoxy and polyurethane polymer composites

Experimental and simulative study of bonding properties on fiber/epoxy interfaces by digital image correlation (DIC) technique and molecular dynamics

Tensile behavior and durability prediction of GFRP-steel composite bars under chloride environments

Hydrothermal aging of short glass fiber reinforced polyphenylene sulfide composites and property prediction

Durability Study on the Interlaminar Shear Behavior of Glass-Fibre Reinforced Polypropylene (GFRPP) Bars for Marine Applications

Characterization of material degradation mechanism of carbon fiber reinforced epoxy resin composites under ultraviolet radiation and salt‐fog synergistic environment