Abstract:CNP1000 is the latest developed nuclear power plant in China. The pre-stressed concrete containment vessel (PCCV), consisting of a semi-spherical dome, a cylinder and two buttresses, is a symbolic structure for CNP1000. In order to verify the seismic safety of this new type of PCCV under the design earthquake level of SL-2 (peak acceleration 0.2 g) and to provide the dynamic test data for earthquake resistant design of the structure and technical integration of the PCCV, a series of single-degree of freedom (SDOF) pseudo-dynamic tests of a 1:10 model were carried out. Based on the loading direction, the test was carried out in two stages. For test stage 1, the loading was applied perpendicular to the connection line of the two buttresses, and for test stage 2 the loading was applied along the connection line of the two buttresses. Theoretical mass of the SDOF system for each test stage was determined based on finite element analysis of the test model. An artificial earthquake wave was employed as the input. There were three load cases for each test stage with the peak acceleration being 1 g, 2 g and 3 g, respectively, corresponding to 0.1 g, 0.2 g and 0.3 g for the prototype PCCV structure, and the corresponding damping ratio of the test model was assumed to be 0.02, 0.05 and 0.05, respectively. The test results indicate that under earthquake excitation of a peak acceleration 2 g (corresponding to design earthquake level SL-2), the tensile strain at some concrete monitoring points near the fixed bottom of the model reached cracking level. The equivalent lateral stiffness of the model is decreased by 5% of its initial value. When the peak acceleration was 3 g, the maximum principal tensile strains at monitoring points on the cylinder, except the monitoring points near the bottom, were less than the cracking strain. The equivalent lateral stiffness of the model is decreased by 14% of its initial value. The test PCCV model as a whole was within the elastic range. The PCCV with semi-spherical dome has sufficient seismic resisting safety.

Ultimate internal pressure of Prestressed Concrete Containment Vessel analyzed by an integral constitutive model

Ultimate Pressure Bearing Capacity Analysis for the Prestressed Concrete Containment

Numerical Modeling and Simulation of a Prestressed Concrete Containment Vessel

High-fidelity Numerical Analysis of the Damage and Failure Mechanisms of a Prestressed Concrete Containment Vessel under Internal Pressure

Aseismic Safety Analysis of a Prestressed Concrete Containment Vessel for CPR1000 Nuclear Power Plant

Fragility Analysis of a Prestressed Concrete Containment Vessel Subjected to Internal Pressure Via the Probability Density Evolution Method

Research on failure mechanism of CPR1000 containment vessel under internal pressure

Experimental Investigation and Design Method of the General Anchorage Zone in the Ring Beam of Prestressed Concrete Containment Vessels

Ultimate Capacity and Influenced Factors Analysis of Nuclear RC Containment Subjected to Internal Pressure

Failure Behavior and Probabilistic Safety Assessment of Containment Structure under Internal Pressure Considering Time-Varying Prestress Loss

Effect of Elevated Temperature and Internal Pressure due to Severe Accidents on the Internal Pressure Capacity of Prestressed Concrete Containment Vessel

The Damage-Based Fragility Analysis and Probabilistic Safety Assessment of Containment under Internal Pressure

Torsional Ultimate Bearing Capacity of Centrifugal Concrete Filled Steel Tube Based on Model of Failure Line

Experimental and Numerical Study of a Rebar-Prestressed Cylinder Concrete Pipe (RPCCP) under Internal Load

Mechanical Analysis for Prestressed Concrete Containment Vessels under Loss of Coolant Accident

NONLINEAR FINITE ELEMENT ANALYSIS OF 1:10 CONTAINMENT MODEL STRUCTURE SUBJECTED TO INTERNAL PRESSURE

Nonlinear Time History Analysis of a Pre-Stressed Concrete Containment Vessel Model under Japan's March 11 Earthquake

A Study on the Performance of Prestressed Concrete Containment with Carbon Fiber-Reinforced Polymer Tendons under Internal Pressure

Fragility Comparison Analysis of CPR1000 PWR Containment Subjected to Internal Pressure

Failure Behavior and Vulnerability of Containment Structures Subjected to Overpressure Loads Considering Different Failure Criteria

Pseudo-dynamic tests of a 1∶10 model of pre-stressed concrete containment vessel for CNP1000 nuclear power plant