Abstract:The nickel-based hardfacing alloys with different Mo contents have been deposited on Q235-carbon steel using a plasma transferred arc (PTA) welding machine. The effects of Mo on the microstructure and wear resistance properties of the nickel-based hardfacing alloys were investigated using optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD). More detailed information about the crystallographic structure and phase compositions of the deposited coatings was obtained with the application of Rietveld refinement method to analyze XRD spectra. It was found that the addition of Mo did not lead to a change in phase compositions. Furthermore, it can also be seen that the relative contents of the total Cr-rich compounds increased from 36 wt.% to 45 wt.%, though the M23C6 type carbide increased but the relative contents of the M7C3 type carbide decreased with the increasing of Mo contents from 0 wt.% to 6 wt.%. The component segregation, which existed in the Mo-free coating, decreased gradually then disappeared finally with the increasing of Mo contents. The morphology of Cr-rich compounds observed in the interdendritic region changed from plate-like to net-like, as well as the refinement of Ni-rich dendrites because of the addition of Mo. The wear resistance increased but the microhardness decreased with the increasing of Mo contents from 0 wt.% to 6 wt.%. The microstructural change and phase contents variation were responsible for the improvement of the mechanical properties such as wear resistance of the Mo-modified nickel-based hardfacing alloy.

The Effect of Mos2 Content on the Protective Performance of Ni-Mos2 Composite Coatings Against Hydrogen Embrittlement in High Strength Steel

Effect of Ni Doping on Electrocatalytic Hydrogen Evolution Activity of MoS2

Graphene Containing Composite Coatings as a Protective Coatings against Hydrogen Embrittlement in Quenching & Partitioning High Strength Steel

Characterization and corrosion behavior of electroless Ni-Mo-P/Ni-P composite coating in CO2/H2S/Cl− brine: Effects of Mo addition and heat treatment

Comparison Of Hydrogen Permeation Properties Of Pure Ni, Ni-Mos2, Ni-Graphene Composite Coatings Deposited On Quenching And Partitioning Steel And The Hot-Dipping Galvanized Steel

A Comparative Study of Hydrogen Embrittlement of 20simn2crnimo, PSB1080 and PH13-8Mo High Strength Steels

Evaluation of Corrosion Behaviour of Ni/Wc-Mos2 Composite Coatings Prepared by Jet Electrodeposition with Different Mos2 Doping Concentrations

Electrochemical Hydrogen Permeation Properties Of Mos2 And Ni80cr20 Films Prepared By Magnetron Sputtering On Pure Iron

Microstructure, Friction, And Wear Properties Of Ni-Al2o3-Mos2 Composite Coatings

Preparation and electrochemical performance of MWCNT/MoS2 composite modified Co–P hydrogen storage material

Tribological properties of molybdenum ion-plated and ion-sulfurized composite coating on mild steel

Impact Fretting Wear of MoS2/C Nanocomposite Coating with Different Carbon Contents under Cycling Low Kinetic Energy

Effect of MoS2 Content on Microstructure and Properties of Supersonic Plasma Sprayed Fe-based Composite Coatings

Compaction of Hydrophobic Molybdenum Disulfide Coatings for Promoting Tribological Behaviors on Engineering Steel

Effects of Molybdenum on the Microstructure and Wear Resistance of Nickel-Based Hardfacing Alloys Investigated Using Rietveld Method

Hydrogen Embrittlement of 27Cr−4Mo−2Ni Super Ferritic Stainless Steel

Effect of H on Mechanical Properties and Corrosion Resistance of Ferritic/Martensitic Steels with Different Si Contents

INVESTIGATION OF HYDROGEN DIFFUSION CHARACTERISTICS OF THE HEAT AFFECTED ZONE OF 2.25CR-1MO-0.25V STEEL BY AN ELECTROCHEMICAL PERMEATION METHOD

Diatomite@MoS2 Nanocomposite Layers as Composite Coating Targeting for Mg Alloys Endowed with Properties of Anticorrosion and Antiwear.

Tribological Performance of Mos2-Based Coatings after Deposition and Storage in Humid Air

The effect of molybdenum content on microstructure, mechanical, tribological and corrosion behavior of Zr-Mo-N composite films