Miniaturized Interferometric Fiber Optical Gyroscopes for Space Application

Jing Jin,Cai Wei,Song Jingming,Xiaobin Xu,Ningfang Song,Chunxi Zhang

DOI: https://doi.org/10.1364/fio.2016.fw2f.3

2016-01-01

Abstract:The configurations of miniaturized interferometric fiber optical gyroscopes (IFOG), miniaturized components, high reliability techniques and performance test results of typical IFOG products are introduced in this paper.

What problem does this paper attempt to address?

Review of Development of Interferometric Fiber-Optic Gyroscopes

Qiu Jialuo,Wang Lei,Huang Tengchao,Shu Xiaowu

DOI: https://doi.org/10.3788/AOS202242.1706004

2022-01-01

Acta Optica Sinica

Abstract:Since the 1970s, the interferometric fiber-optic gyroscope (IFOG) technology based on the Sagnac effect which boasts unique advantages, has developed rapidly with the increasing application and maturity of optical devices such as optical fibers, light sources, and phase modulators in optical communication. Over the past 40 years, this technology has moved from the laboratory to various practical fields such as land, sea, air, and space. This paper reviews the recent development of the IFOG technology. Firstly, the exploration process of this technology from the birth of the Sagnac effect to its practical applications is introduced. Secondly, the classical minimum reciprocity configuration of IFOGs and the signal processing scheme are described. Then, the research status of this technology in high precision , miniaturization , and application environment adaptability is summarized. Finally, the development and application trends of this technology are analyzed.
Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

Junjie Yao,Xuan She,Bei Li,Chenge Wang,Kan Chen,Tenchao Huang,Xiaowu Shu

DOI: https://doi.org/10.1016/j.optcom.2019.07.048

IF: 2.4

2019-01-01

Optics Communications

Abstract:In this paper, we present a full description of the design and fabrication of a compact spot-size converter (SSC) applied to interferometric fiber optic gyroscopes (IFOGs). The obtained SSC has a length of 500 um and a coupling efficiency of 52%. The polarization dependency of the SSC is less than 0.1 dB, and the variation tendencies of our experimental results agree well with a simulation. The SSC possesses many properties suitable for various optical communication and sensing systems, including small size, high coupling efficiency, integration, and high stability.
Experimental Study and Analysis of High Sensitivity Interferometric Fiber Optic Gyroscope Using Multi-Core Fiber

Lijun Miao,Jin Shi,Jingtao Yan,Yishi Liu,Xiaowu Shu,Shuangliang Che

DOI: https://doi.org/10.1016/j.yofte.2022.103052

IF: 2.8

2022-01-01

Optical Fiber Technology

Abstract:In this paper, multi-core fiber (MCF) is integrated in interferometric fiber optic gyroscope (IFOG) as the sensing coil to improve its sensitivity without increasing the fiber length or Shupe error. We have used a 300-m long 7 -core fiber and connected 4 cores of MCF to each other by fan-in and fan-out (FIFO) devices of fused taper in closed-loop IFOG to replace the traditional single-core fiber (SCF). Before experiment, the main benefits and certain possible problems of using MCF are explained and analyzed. The angular random walk (ARW) of 0.006 degrees/ root h and drift of 0.01 degrees /h have been achieved, which is close to the performance of IFOG using the 1200-m long SCF. Besides having a lower Shupe sensitivity, the MCF-IFOG also has small crosstalk effect when using broadband light source. The results show that the scheme of MCF for IFOG is expected to be used in practical application in the foreseeable future.
Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Junjie Yao,Ke Li,Bei Li,Chenge Wang,Chen Kan,Xuan She,Xiaowu Shu

DOI: https://doi.org/10.1109/jlt.2018.2875795

IF: 4.7

2018-01-01

Journal of Lightwave Technology

Abstract:In this paper, we theoretically analyze the wavelength temperature stability of multifunctional integrated optical chips (MIOCs) applied on fiber optic gyroscopes (FOGs). This study is critical for improving the temperature stability of the FOG scale factor, which is a significant parameter used to evaluate the dynamic characteristics of FOGs. Analytical and multiphysics simulations uncover two significant new predictions. First, changes in environmental temperature can lead to misalignment of the coupling structure between the chip and fiber, which is the main reason for the deterioration of the MIOC wavelength temperature stability. Second, misalignment caused by temperature changes is related to the initial alignment parameters of the coupling structure. Therefore, we can effectively improve the wavelength temperature stability of an MIOC by correctly choosing the initial alignment state of the coupling structure. Space coupling experiments are also presented to verify these predictions, and the experimental and simulation results are in good agreement.
Principle and Application of High Dynamic Fiber Gyroscope

Lei WANG,Xing-fan CHEN,Cheng LIU,Xiao-wu SHU

DOI: https://doi.org/10.3969/j.issn.1009-086x.2017.06.001

2017-01-01

Abstract:A method for designing a high dynamic fiber optic gyroscope (FOG) is presented for a class of high spinning carrier with demand of accuracy and range.It is fulfilled by identification of fringes to detect phase error beyond[-π,+ π] with the dynamic range over 40 000 (°)/s,which provides a new simple,effective and high reliability scheme for light of sight (LOS) stabilization and attitude control of navigation systems.
Angle error from vibrating in tri-axial interferometric fiber optic gyroscopes and the evaluation with dual-laser Doppler vibrometers

Shuai Zhao,Lei Chen,Ning Guan,Yilan Zhou,Dengwei Zhang,Xiaowu Shu,Cheng Liu

DOI: https://doi.org/10.1016/j.yofte.2019.102071

IF: 2.8

2020-01-01

Optical Fiber Technology

Abstract:In this paper, we accurately obtained the depolarized interferometric fiber optic gyroscope (D-IFOG) output error caused by elasto-optic effect in vibration environment. We established the optical transmission model of DIFOG and simulated the stress distribution of D-IFOG caused by vibration based on finite element method. The computational results show that the angular velocity error has a phase difference of 90 degrees with the sinusoidal excitation, and when the vibration's amplitude is 4 g and the frequency is 70 Hz, for triaxial D-IFOGs, the maximum angle error of Y-axis is up to 3.54 x 10(-4)degrees, and that of X-axis and Z-axis is 6.26 x 10(-5)degrees. And we set up a high-precison dynamic angular measurement system based on dual-laser Doppler vibrometers to evaluate the angular error in D-IFOGs. The experimental results are consistent with those of numerical simulations, which have verified the angle error model. This work is meaningful for the follow-up D-IFOG's vibration error compensation.
Research on the Frequency-Dependent Halfwave Voltage of a Multifunction Integrated Optical Chip in an Interferometric Fiber Optic Gyroscope.

Ran Bi,Lijun Miao,Tengchao Huang,Guangyao Ying,Shuangliang Che,Xiaowu Shu

DOI: https://doi.org/10.3390/s19132851

IF: 3.9

2019-01-01

Sensors

Abstract:The multifunction integrated optical chip (MIOC) is one of the most critical parts of the interferometric fiber optic gyroscope (IFOG), and research on the halfwave voltage of the MIOC is meaningful for a high-precision IFOG. In this paper, the correlation between the frequency and halfwave voltage, which affects the interference light intensity of IFOG, is presented theoretically. A widespread measurement method for frequency dependence of the halfwave voltage, based on lock-in amplification and sinusoidal modulation, is proposed. Further, the measurement result and the oscillation of interference light intensity in the Sagnac interferometer are presented, which are in great agreement with the theory. This paper proposes the frequency dependence of the halfwave voltage and provides a new error research direction for the improvement of the MIOC in a high-precision IFOG.
Research on testing technology based on three-axis diagonal integration of fiber-optic gyro

Yun-peng GUO,Li-jun MIAO,Xiao-wu SHU

DOI: https://doi.org/10.13873/J.1000-9787(2017)12-0022-03

2017-01-01

Abstract:Characteristic testing technology of three-axis diagonal integration of fiber-optic gyro is an important part of high precision intertial navigation.The original calibration method of the scale fator and resolution of three-axis diagonal integration of fiber-optic gyro depends on the tooling and tests the gyro one by one based on the theoretical testing model.The testing time of original method is long and the method is strict in precision of tooling,Aiming at the above problems,put forward a new method that calibrates the scale factor and resolution by measuring installation error and calculating rotation matirx.The experiment proves that the new method can calibrates the scale factor and resolution of all gyro of three-axis diagonal integration of fiber-optic gyro quickly and accurately.The new method has solved the problems of original testing technology for three-axis diagonal integration of fiber-optic gyro being complicated,time-consuming,strict in clamping.
The Research Of Digital Close-Loop Depolarized Fog

Xiaowu Shu,Cheng Liu

DOI: https://doi.org/10.1109/wcica.2000.863495

2000-01-01

Abstract:A fiber-optic gyroscope (FOG) has already been selected to fulfill the inertial navigation system(INS) function of the new airspace. We have completed the development of intermediate grade closed-loop mode FOG(0.2 to 0.4 degree/h, 1 sigma, 500ppm, 1 sigma )satisfying environment requirement with 500 meter mono-mode fiber, which is controlled exclusively by a high-speed Digital Signal Processor(DSP). The control and compensation algorithms are implemented in software and carried out by a single high speed DSP. The processor also takes care of the communication protocol via a parallel bus.
Scale Factor Calibration and Dynamic Angle Measurement Method Based on Self-Collimator and Fiber Optic Gyroscope

Jiapeng Mou,Tengchao Huang,Guangyao Ying,Shuangliang Che,Xiaowu Shu

DOI: https://doi.org/10.1016/j.yofte.2019.101945

IF: 2.8

2019-01-01

Optical Fiber Technology

Abstract:The scale factor, which the output of the fiber optic gyroscope (FOG) is proportional to, is sensitive to many factors in engineering. When the scale factor fluctuates during the measurement process, it will bring an error to the angle measurement results if the scale factor is not calibrated in time. A scale factor real-time calibration and angle measurement scheme based on self-collimator is proposed to eliminate the error caused by the fluctuation of the scale factor. The experimental results show that the error between the FOG and the rotary table is decreased to nearly 1 '' after adopting the scheme at low angular velocities. Although the error is become larger when the angular velocity is increasing, the angle measurement results can still has a good stability.
Research on the Feedback Control Characteristics and Parameter Optimization of Closed-Loop Fiber Optic Gyroscope

Jingtao Yan,Lijun Miao,Min Chen,Tengchao Huang,Shuangliang Che,Xiaowu Shu

DOI: https://doi.org/10.1016/j.ijleo.2021.166298

IF: 3.1

2021-01-01

Optik

Abstract:The feedback parameter of closed-loop fiber optic gyroscope (FOG) in various engineering applications is discussed. It has been proved that unreasonable feedback parameter will cause great interference and serious distortion to the output signal. Therefore, we build a concise feedback control mode and obtain optimal range of feedback parameter. For different input signals concerned which nearly include all of the application scenarios in practice, detailed simulations and experiments are completed. The results show that the feedback parameter should be small in static applications and moderate for high response requirements. What is more, it should be relatively small when used in low-bandwidth measurement fields to ensure the response performance of low frequency signal and suppress high frequency noise and vice versa. This work plays an important guiding role for related parameter setting in the feedback control system of sensors, especially for gyroscope.
A Comparison Angular Vibration Calibration Approach Based on the IFOG

Wang Xianfan,Mou Jiapeng,Miao Lijun,Huang Tengchao,Che Shuangliang

DOI: https://doi.org/10.1007/s12647-021-00464-y

2021-01-01

MaPan

Abstract:In recent years, the performance of an interferometric fiber optic gyroscope (IFOG) has been increased a lot and widely used for dynamic angle measurement. In this paper, we present an investigation on measurement uncertainty of the IFOG and propose a comparison angular vibration calibration approach based on an IFOG. The operation principle of the closed-loop IFOG is introduced, and its error model in angle measurement is derived. Furthermore, the measurement uncertainty components in angular vibration calibration are analyzed by comparing with primary angular vibration calibration. By using a standard angular vibration system in the Nanjing Institute of Measurement and Testing Technology, China, the angular vibration calibration capability of the IFOG is evaluated within frequency range of 1–200 Hz. In addition, the traceability of this proposed calibration approach is also discussed.
Advanced Interferometric Fiber Optic Gyroscope for Inertial Sensing: A Review

Ningfang Song,Xiaobin Xu,Zuchen Zhang,Fuyu Gao,Xiaowei Wang

DOI: https://doi.org/10.1109/jlt.2023.3260839

IF: 4.7

2023-01-01

Journal of Lightwave Technology

Abstract:As one of the most successful applications in optical fiber sensing, interferometric fiber optic gyroscope (IFOG) has become the ideal choice for inertial navigation systems, and has been widely used in the fields of aviation, aerospace, navigation, and land. Exploring the theoretical noise limit and improving the practical precision are the objectives of FOG investigations, and the advanced photonic crystal fibers offer powerful approaches and potential to achieve these goals. In this review, the progress of photonic crystal fibers in FOGs research and applications for angular velocity measurement have been reviewed, together with the advanced technologies for improving the FOG's precision and reducing its volume.

engineering, electrical & electronic,optics,telecommunications
Navigation-grade Resonant Fiber-Optic Gyroscope Using Ultra-Simple White-Light Multibeam Interferometry

Shuangxiang Zhao,Qingwen Liu,Yuanyuan Liu,Huilian Ma,Zuyuan He

DOI: https://doi.org/10.1364/prj.443496

IF: 7.6

2021-01-01

Photonics Research

Abstract:The miniaturization of the gyroscope is critical for spacecrafts, drones, wellbore surveys, etc. The resonant fiber-optic gyroscope (RFOG) is a competitive candidate due to its potential in both miniaturization and high resolution, while its actual performance is well below expectation because of laser-induced noise and complexity. Here we report the first navigation grade RFOG with a bias instability of 0.009°/h and an angle random walk of 0.0093°/ h . The results are realized using a fiber resonator with finesse of 63 containing 100-m long fiber. Compared with the traditional RFOGs using narrow-linewidth lasers, the key feature of the proposed RFOG is that it is driven with a broadband light source. A white-light multibeam interference method is proposed to detect the Sagnac effect, representing the simplest scheme of RFOG to date. The complexity caused by multiple feedback loops and coherent noise suppression in traditional RFOG scheme is avoided. The minimal scheme and simple modulation algorithm will also promote the on-chip waveguide gyroscope.
Ultrahigh Bandwidth Measuring Approach of an I-FOG Based on Axial Magnetic Sensitivity.

Xuechi Li,Lizhong Xu,Cui Liang,Beibei Xu,Yilan Zhou,Lijun Miao,Dengwei Zhang

DOI: https://doi.org/10.1364/ol.493587

2023-01-01

Abstract:The bandwidth is one of the key indicators of the interferometric fiber optic gyroscope (I-FOG) in the application with high frequency jitter. The traditional bandwidth measurement equipment, such as the angular vibration table, can only provide angular vibrations of hundreds of hertz and cannot meet the measurement needs of a high bandwidth gyro. We propose an approach, with which a signal of several thousand hertz can be provided and can measure a high bandwidth of I-FOGs. The bandwidth measurement approach is based on the axial magnetic sensitivity. We present the measurement principle, derive the axial magnetic sensitivity expression of the fiber coil in I-FOGs, and demonstrate the bandwidth measuring system. With this system, the bandwidth of an I-FOG is measured and the experimental result shows that the bandwidth is ∼10 kHz. It is proved that this new, to the best of our knowledge, approach is capable of testing the bandwidth of the I-FOG at ultrahigh frequencies.
Three-axis Interferometric Fiber Optic Gyroscope with Silica Integrated Coupler Chip

Zhiyu Guo,Jing Jin,Xiaowei Wang,Ningfang Song,Jingming Song,Xiaobin Xu,Zuchen Zhang

DOI: https://doi.org/10.1109/jsen.2023.3260206

IF: 4.3

2023-01-01

IEEE Sensors Journal

Abstract:Chip-scale interferometric fiber optic gyroscope (IFOG) has caught growing attention for its huge application potential in the low-cost consumer electronics market. In this article, a novel three-axis IFOG is proposed and assembled with an integrated coupler chip (ICC) fabricated on the silica platform. The ICC realizes bidirectionally multichannel optical interconnection without waveguide crossings. The test results indicate the weak wavelength dependence and comparatively low insertion loss at $0.85 mu ext{m}$ of the ICC. With $sim $ 900-m polarization-maintaining fiber coils, the three-axis IFOG exhibits a long-term stability of $< 0.16^{circ }$ /h, which satisfies the requirements of the tactical grade systems. The novel IFOG scheme with ICC paves the way for the research on chip-scale multiaxis IFOGs.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Near-navigation-grade interferometric fiber optic gyroscope with an integrated optical chip

Kejun Shang,Ming Lei,Qiang Xiang,Yonglin Na,Lizhe Zhang,Huaiyong Yu

DOI: https://doi.org/10.3788/col202018.120601

IF: 2.56

2020-01-01

Chinese Optics Letters

Abstract:Kejun Shang, Ming Lei, Qiang Xiang, Yonglin Na, Lizhe Zhang, Huaiyong Yu<br/>We present a near-navigation-grade interferometric fiber optic gyroscope (IFOG) based on an integrated optical chip. The chip comprises a ... [Chin. Opt. Lett. 18, 120601- (2020)]

optics
Dual-polarization Interferometric Fiber Optic Gyroscope Based on a Four-Port Circulator

Yuwen Cao,Lanxin Zhu,Yanjun Chen,Huimin Huang,Wenbo Wang,Yan He,Xiangdong Ma,Zhengbin Li

DOI: https://doi.org/10.1364/oe.476127

IF: 3.8

2023-01-01

Optics Express

Abstract:The dual-polarization interferometric fiber optic gyroscope (IFOG) has been studied for many years and achieved remarkable performance. In this study, we propose a novel dual-polarization IFOG configuration based on a four-port circulator, in which the polarization coupling errors and the excess relative intensity noise are well handled meanwhile. Experimental measurements of the short-term sensitivity and long-term drift using a fiber coil with a length of 2 km and a diameter of 14 cm show that the angle random walk of 5.0×10−5∘/h and bias instability of 9.0 × 10−5 °/h are achieved. Moreover, the root power spectrum density of 20nrad/s/Hz is almost flat from 0.001 Hz to 30 Hz. We believe this dual-polarization IFOG is a preferred candidate for the reference-grade performance IFOG.
A High-Sensitivity Giant Interferometric Fiberoptic Gyroscope for Seismic Observation

Huimin Huang,Yujia Cao,Lanxin Zhu,Yanjun Chen,Wenbo Wang,Fangshuo Shi,Xinyu Cao,Zhengbin Li

DOI: https://doi.org/10.1109/jlt.2024.3454989

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:Optic gyroscopes are widely used in geophysics. Compared with ring laser gyroscopes, interferometric fiber optic gyroscopes (IFOGs) have advantages such as low cost and full solid-states. In this paper, we focus on the design, noise suppression, and implementation of IFOGs and establish a high-sensitivity giant IFOG system for seismic observation. The diameter of the giant IFOG is 2m, and it uses 20.68km of polarization-maintaining optical fiber to provide a sensing area of up to 10300 m\boldmath $ ^{2}$ . The highest sensitivity of the giant IFOG can reach $ 1\times 10^{-9}$ $ \mathrm{rad/s/\sqrt{Hz}}$ in the frequency range of 0.01–0.6Hz, and angular random walk (ARW) and bias instability (BI) reach $ 3\times 10^{-9}$ $\mathrm{rad/\sqrt{s}}$ and $ 4\times 10^{-11}$ $ \mathrm{rad/s}$ , respectively. It is currently the best performing giant IFOG publicly reported. Based on the developed giant IFOG, we successfully observed the Pn and Pg coda waves in the vertical component of natural seismic rotation, which indicates that high-sensitivity giant IFOGs have significant advantages in seismic observation. This paper provides a theoretical and experimental foundation for achieving high-sensitivity giant IFOGs and it offers new measurement parameters and methods for geodesy and geophysics.
Interferometric Fiber-Optic Gyroscope Based on Mode-Division Multiplexing

Yuwen Cao,Xiangdong Ma,Yanjun Chen,Huimin Huang,Lanxin Zhu,Wenbo Wang,Yan He,Zhengbin Li

DOI: https://doi.org/10.1364/ol.494087

IF: 3.6

2023-01-01

Optics Letters

Abstract:The interferometric fiber-optic gyroscope (IFOG) is widely used in the fields of inertial navigation and rotational seismology. A direct way to improve the sensitivity of the IFOG is to increase the length of the sensing fiber, but this increases the cost and size of the gyroscope. Here, we propose an IFOG based on mode-division multiplexing (MDM), which exhibits relatively high performance. The experimental results show that, the proposed IFOG is improved to twice as much in terms of sensitivity, angle random walk, and bias instability with the use of MDM. This research provides a novel, to the best of our knowledge, solution for the design and implementation of low-cost, high-sensitivity IFOGs, which could contribute to their application in a wider range of fields.

Miniaturized Interferometric Fiber Optical Gyroscopes for Space Application

Review of Development of Interferometric Fiber-Optic Gyroscopes

Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

Experimental Study and Analysis of High Sensitivity Interferometric Fiber Optic Gyroscope Using Multi-Core Fiber

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Principle and Application of High Dynamic Fiber Gyroscope

Angle error from vibrating in tri-axial interferometric fiber optic gyroscopes and the evaluation with dual-laser Doppler vibrometers

Research on the Frequency-Dependent Halfwave Voltage of a Multifunction Integrated Optical Chip in an Interferometric Fiber Optic Gyroscope.

Research on testing technology based on three-axis diagonal integration of fiber-optic gyro

The Research Of Digital Close-Loop Depolarized Fog

Scale Factor Calibration and Dynamic Angle Measurement Method Based on Self-Collimator and Fiber Optic Gyroscope

Research on the Feedback Control Characteristics and Parameter Optimization of Closed-Loop Fiber Optic Gyroscope

A Comparison Angular Vibration Calibration Approach Based on the IFOG

Advanced Interferometric Fiber Optic Gyroscope for Inertial Sensing: A Review

Navigation-grade Resonant Fiber-Optic Gyroscope Using Ultra-Simple White-Light Multibeam Interferometry

Ultrahigh Bandwidth Measuring Approach of an I-FOG Based on Axial Magnetic Sensitivity.

Three-axis Interferometric Fiber Optic Gyroscope with Silica Integrated Coupler Chip

Near-navigation-grade interferometric fiber optic gyroscope with an integrated optical chip

Dual-polarization Interferometric Fiber Optic Gyroscope Based on a Four-Port Circulator

A High-Sensitivity Giant Interferometric Fiberoptic Gyroscope for Seismic Observation

Interferometric Fiber-Optic Gyroscope Based on Mode-Division Multiplexing