Abstract:Purpose - In high-speed processing, the influence on the machining accuracy of a machine tool is greatly caused by the thermal deformation of the motorized spindle; a further study on the thermal characteristics of the spindle is given in this paper. This study aims to reduce the thermal error and improve the performance of the machine tool by discussing the relationships between the temperature distributions and rotating accuracy caused by the thermal deformations of the spindle.Design/methodology/approach - The paper opted fora method combining the theoretical analysis and the experimental study to study the thermal stability of the high-speed motorized spindle. First of all, a finite element model of the spindle was built with ANSYS, whereby temperature distributions and the thermal deformations were successively obtained at different speeds. And then, both the temperature field and the rotating accuracy of the motorized spindle were measured simultaneously by the thermal stability experiment. Finally, the experimental and theoretical results were compared and validated.Findings - The thermal stability of the motorized spindle was studied in this paper, and some findings from the study were as follows: the spindle's rotating accuracy maintained good in X direction but bad in Y and Z directions in terms of the deformations; the higher front-end temperature of the spindle which can significantly affect the rotating accuracy is needed to be controlled mainly; the recovery speed of the spindle deformation lagged behind the temperature's fallback speed; the vibration graph about radial rotating sensitivity synthesized by X1 and X2 presented a trifoliate shape.Originality/value - Based on a built test-bed which can synchronously measure the motorized spindle's temperature distribution and rotating accuracy with five-point method, the coupling effects of the thermal deformation and temperature are embodied, and not only the vibration graph but also the thermal tilt angles can be gained. Therefore, considering the influence of the thermal deformation on the heat generated by the bearings, the paper fulfilled a study by which it was obtained that the front-end temperature of the spindle, which was higher and could significantly affect the rotating accuracy, needed to be controlled mainly.

Study on the Influence of Thermal Characteristics of Rolling Bearings and Spindle Resulted in Condition of Improper Assembly

Finite Element Analysis of Spindle Thermal Character Based on Thermal Contact Resistance

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Study on the Influence of Machine Tool Spindle Radial Error Motion Resulted from Bearing Outer Ring Tilting Assembly

Uneven Heat Generation and Thermal Performance of Spindle Bearings

Thermal-structure Interaction Characteristics of a High-Speed Spindle-Bearing System

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Effect of structure and assembly constraints on temperature of high-speed angular contact ball bearings with thermal network method

Transient thermal properties investigation for precision bearing-spindle system considering fixed-position preload and lubricant viscosity-temperature effect

Thermal-Mechanical Coupling Performance and Its Influence on Thermal Stiffness of Cylindrical Roller Bearings

Thermal effect modeling of axial static stiffness of motorized spindle unit

Heat Analysis of Ball Bearing under Nonuniform Preload Based on Five Degrees of Freedom Quasi-Static Model

Numerical Simulation on the Stress Distribution of High Speed Angular Contact Rolling Bearing

Thermo-mechanical analysis of angular contact ball bearing

Nonlinear dynamic analysis of CNC lathe spindle-bearing system considering thermal effect

Experimental Study On Thermal Effect Of Tilted Roller Pairs In Rolling/Sliding Contacts

Design of an Aircraft Rolling Bearings Platform and Its Thermal Performance Evaluation

Analysis of Thermo-Mechanical Coupling of High-Speed Angular-Contact Ball Bearings

Thermal Characteristics Analysis and Experimental Study on the High-Speed Spindle System

Thermal coefficients modification of high speed ball bearing by multi-object optimization method

Theoretical Analysis And Experimental Study On Thermal Stability Of High-Speed Motorized Spindle