Abstract:6061 Al alloy is widely used for structural components in the structural, building, aerospace and automobile industry because of their good extrude-ability, high strength and low density. 6061 Al alloy is easily corroded during the corrosive environments containing Cl , which lead to the decreasing of the alloy service life. Therefore, the Al alloy need to adopt surface treatment to improve the corrosion resistance. The chromate passivation was the most effective surface treatment technology of Al alloys in the past. However, Cr(VI) could pollute the environment and harmful to human body. Thus, it is necessary to develop chromium-free films to protect Al alloy. Layered double hydroxides (LDHs) are an environment-friendly and smart material, which could be used for anticorrosion film. The inhibitor can be inserted into the film layer due to its unique anion exchanging capacity. Therefore, the LDHs is acquired self-healing performance and applied to the anticorrosion field of Al alloy. Meanwhile, vanadate is a good inhibitor and it has many forms under different pH conditions. Moreover, different forms of vanadate have different influence on LDHs film. The corrosion resistance of LDHs and its modified form films on Al alloys need deep study. In this work, ZnAI-LDHs films with NO3- were prepared on the suface of 6061 Al alloy via a facile in-situ growth method, and then ZnAl-LDHs-NO3 films were intercalated with the corrosion inhibitor VO4-3 and VO3- to obtain the ZnAI-LDHs-VO4 and ZnAl-LDHs-VO3 films, respectively. The structure, morphology and composition of as-prepared ZnAI-LDHs films were investigated by XRD, fourier infrared spectrometer (FT-IR) and SEM; the corrosion behavior of ZnAI-LDHs films in the 3.5%NaCI (mass fraction) solution were studied by the electrochemical workstation and the 3D microscope. The results show that the plate-like ZnAI-LDHs microcrystals are perpendicular to the substrate and cover almost the entire Al alloy substrate surface. Compared with the 6061 Al substrate, ZnAI-LDHs films can not only decrease the corrosion current (I-corr), but also increase the corrosion potential (E-corr) and charge transfer resistance (R-ct) of the 6061 Al alloy. It is suggested that ZnAI-LDHs films could significantly enhance the corrosion resistance of 6061 Al substrate, indicating an effective protection for 6061 Al alloy by the ZnAI-LDHs film. The ZnAl-LDH-VO3 film is of the highest corrosion resistance in the studied ZnAI-LDHs films.

A Reinforced Organic-Inorganic Layer Generated on Surface of Aluminium Alloy by Hybrid Inhibitors

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Enhanced Corrosion Protection by Al Surface Immobilization of In-Situ Grown Layered Double Hydroxide Films Co-Intercalated with Inhibitors and Low Surface Energy Species

A novel corrosion inhibitive system comprising Zn-Al LDH and hybrid sol-gel silane nanocomposite coating for AA2024-T3

Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solution

Synergistic Inhibition of Cerium and Alkyl Phosphate Composite Adlayer on Pitting Corrosion of Al–Mg–Si Aluminium Alloy

An Inhibitor-Loaded LDH- and MOF-Based Bilayer Hybrid System for Active Corrosion Protection of Aluminum Alloys

Synthesis and characterization of phenolphthalein derivatives, detailed theoretical DFT computation/molecular simulation, and prevention of AA2024-T3 corrosion in medium 3.5% NaCl

Catechol/m-Phenylenediamine Modified Sol–Gel Coating with Enhanced Long-Lasting Anticorrosion Performance on 3003 Al Alloy

Anticorrosion and Antibiofouling Performance of In-Situ Prepared Layered Double Hydroxide Coating Modified by Sodium Pyrithione on Aluminum Alloy 7075

Synergistic effect of Al 3+ on in-situ constructing a stearic acid anti-corrosion coating for galvanized steel

Double-Ligand Strategy to Construct an Inhibitor-Loaded Zn-MOF and Its Corrosion Protection Ability for Aluminum Alloy 2A12

Localized Corrosion and Corrosion Inhibitor of Al-alloy AA6061 Beneath Electrolyte Layers

Preparation and Corrosion Resistance of the ZnAl-LDHs Film on 6061 Al Alloy Surface

Enhancement of corrosion resistance of AZ31 Mg alloys by one-step in situ synthesis of ZnAl-LDH films intercalated with organic anions (ASP, La)

Active Corrosion Protection by Epoxy Coating on Li2CO3-Pretreated Anodized Aluminum Alloy 2024-T3

Biomimetic superhydrophobic matrix constructed on a buffer aluminum layer: A compositing coating for Mg-Li alloy corrosion inhibition

Active Release of Diatomite-Mgal-layered Double Hydroxide Nanostructures on Corrosive Inhibitors to Effectively Suppresses Corrosion of LA51 Alloy

Three Organic Corrosion Inhibitors on LY12CZ Aluminum Alloy in Acid Solution

Analysis of the Ce(III) chloride, Ce(III) nitrate, and Ce(III) propionate as corrosion inhibitor of the aluminum alloys in NaCl solution

Active Corrosion Protection of Super-Hydrophobic Corrosion Inhibitor Intercalated Mg–Al Layered Double Hydroxide Coating on AZ31 Magnesium Alloy