Abstract:The boiling flow and heat transfer performance of four different pin-fins in microchannels are investigated through visualization experiment research. Flow boiling visualization results have been conducted by using deionized water as working fluid with circulating under flow rates in the range of 0.25~9kg/h, with the inlet temperature as 30 ℃ and heating power as 126W. The experimental results show that the flow patterns in the channel are mist flow, annular flow, isolated bubble and no bubble. And the flow pattern corresponds to the pressure change. With the increase of Re, the pressure drop in the microchannel first increases rapidly, then decreases, and finally increases again. The change process of pressure drop corresponds to the bubble heat transfer process. The corresponding heat transfer processes include film boiling、transition from film boiling to nucleation boiling、nucleation boiling and single-phase convection. At the same time, the state of bubbles in the channel can correspond to the intensity and mode of heat transfer. The average surface temperature of the bottom plate decreases with the increase of Re. The average convective heat transfer coefficient increases, then decreases and increases again with the increase of Re. The twice increases are mainly due to liquid film evaporation and single-phase flow transition. The average convective heat transfer coefficient increases with the increase of heat flux. And in four different micro-fin shapes, the heat transfer effect of triangle fin array is the best, because the disturbance of triangle to fluid is the most intense. While in the nucleation boiling region, the convective heat transfer coefficient of triangle micro-fin arrays is the largest. At that stage, the bubbles in triangle micro fin array grow and separate more easily.When the Re is less than 130, the number of bubbles in the triangle micro array is great than that in the ellipse micro array, and the bubble departure diameter is the largest, as well. And the bubble growth time and bubble waiting time are the shortest. When Re is greater than 130, the number of bubbles in the channel is relatively small, and the nucleation boiling intensity decreases. When the Re continues to increase, there are few or no bubbles in the channel, which is close to the single-phase convection. Moreover, the pressure drop, bottom temperature and convective heat transfer coefficient of triangle micro fin array change most obviously. The results show that when Re increases from 30 to 125, the bottom temperature decreases by 41 ℃, the maximum convective heat transfer coefficient reaches 16800 w / m2 · ℃, and the maximum Nu is 10.

Experimental study and optimization of pin fin shapes in flow boiling of micro pin fin heat sinks

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Experimental study of flow boiling in microchannel heat sink enhanced with partially in-line pin fins fence arrangement

Experimental study of subcooled flow boiling in microchannel heat sinks integrated with different embedded pin fin arrays microstructures

Study on the flow and heat transfer characteristics of pin-fin manifold microchannel heat sink

Experimental study of flow boiling performance of open-ring pin fin microchannels

Effect of fin shapes on flow boiling heat transfer with staggered fin arrays in a heat sink

Experimental study on two-phase pressure drop and flow boiling heat transfer in a micro pin fin channel heat sink under constant heat flux

Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins

Convective heat transfer of microchannel heat sinks with pinfins and jets for a heat flux up to 500 W/cm 2

Enhanced heat transfer of heat sink channels with micro pin fin roughened walls

Experimental study on the effect of shape on the boiling flow and heat transfer characteristics of different pin-fin microchannels

Numerical Simulation of Flow and Heat Transfer Characteristics in Non-Closed Ring-Shaped Micro-Pin-Fin Arrays

A Review on Application of Pin-Fins in Enhancing Heat Transfer

The simulation analysis on the influence of non-closed droplet structure on thermal/ flow performance of pin fin heat sinks

Parametric study on the combined thermal and hydraulic performance of single phase micro pin-fin heat sinks part I: Square and circle geometries

Experimental investigation of the thermal-hydraulic characteristics of liquid cooling heat sinks with novel pin fins

Experimental investigation of flow boiling characteristics in microchannel with triangular cavities and rectangular fins

Fluid flow and heat transfer characteristics of a microstructured microchannel heat sink under flow boiling condition

Water Flow Boiling in a Partially Modified Microgap with Shortened Micro Pin Fins