Abstract:The wireless electric vehicle (EV) charging system is highly safe and flexible. To reduce the weight and cost of EVs, the wireless charging system, which simplifies the structure inside an EV and utilizes the transmitter-side control method, has become popular. This study investigates the transmitter-side control methods in a wireless EV charging system. First, a universal wireless charging system is introduced, and the function of its transfer power is derived. It is observed that the transfer power can be controlled by regulating either the phase-shift angle or the DC-link voltage. Further, the influence of the control variables is studied using numerical analysis. Additionally, the corresponding control methods, namely the phase-shift angle and the DC-link voltage control, are compared by calculation and simulation. It is found that: (1) the system efficiency is low with the phase-shift control method because of the converter switching loss; (2) the dynamic response is slow with the DC-link voltage control method because of the large inertia of the inductor and capacitor; (3) both the control methods have limitations in their adjustable power range. Therefore, a combined control method is proposed, with the advantages of high system efficiency, fast dynamic response, and wide adjustable power range. Finally, experiments are performed to verify the validity of the theoretical analysis and the effectiveness of the proposed method. This study provides a detailed and comprehensive analysis of the transmitter-side control methods in the wireless charging system, considering the sensitivity of parameters, converter losses, system efficiency, and dynamic performance, with the dead-time effect taken into consideration. Moreover, the proposed control method can be used to realize the optimal combination of the phase-shift angle and the DC-link voltage with good dynamic performance, and it is useful for the optimal operation of the wireless charging system.

Analysis of Z-Source Inverters in Wireless Power Transfer Systems and Solutions for Accidental Shoot-Through State

Multi-Objective Optimization of the Wireless Power Transfer System for Electric Vehicles

Analysis and Design of Wireless Charging Systems Without Extra Components for Load-Independent Constant Current and Voltage Battery Charging

Impedance Network Impact on the Controller Design of the QZSI for PV Applications

Modeling and advanced control of wireless power transfer system with Z-source inverter

Analysis of Circuit Path and Current Stress of Power Devices under Shoot-Through Mode in Z-Source Inverter

Analysis of Freewheeling State in Z-Source Inverter under Three-Phase Shoot-Through Mode

Characteristic Analysis of the Grid-Connected Impedance-Source Inverter for PV Applications

Research on Efficiency Optimization of Wireless Power Transfer System Using a Quasi-Z-source Converter

Modeling And Control Of Single-Phase Quasi-Z-Source Inverters

Analysis, Design, and Implementation of Accurate ZVS Angle Control for EV Battery Charging in Wireless High-Power Transfer

Principle And Implementation Of The Shoot-Through Current Reconstruction Using Combined Current Sensing In The Quasi-Z-Source Inverter

Modeling and Analysis of Wireless Power Transfer System with Constant-Voltage Source and Constant-Current Load

Analysis and Design of Snubber Circuit for Z-source Inverter

System Modeling and Switching Control Strategy of Wireless Power Transfer System

Impedance Shaping Control Strategy for Wireless Power Transfer System Based on Dynamic Small-Signal Analysis

Design and Optimization of a Modular Wireless Power System Based on Multiple Transmitters and Multiple Receivers Architecture

Loss Analysis in Wireless Power Transfer System Based on GaN

Analysis of Transmitter-Side Control Methods in Wireless EV Charging Systems

Analysis of Structure and Parameters in Wireless Power Transmission System with Consideration of Losses in Source

Study on Z-source Inverter for Photovoltaic Generation System