Abstract:The quasi-Z-source inverter (qZSI) has been widely explored for renewable energy applications due to its superiority, e.g., higher boosting ratio and operational reliability, which is attained by inserting shoot-through (ST) states. As a conventional space vector modulation (SVM) method for the three-phase qZSI, the ZSVM6 method is easy to implement by dividing the ST time into six identical intervals. However, the instantaneous inductor current ripples of the qZSI with the ZSVM6 strategy are affected by the operating conditions, e.g., modulation index m and ST duty ratio dsh. In this article, the instantaneous inductor current ripples and the maximum current ripple in the qZSI with the ZSVM6 strategy under all operational conditions are explored in detail. The operational conditions are categorized into several cases according to the relationship among the duty ratios of the active states, null states, and ST states. More importantly, an improved ZSVM6 strategy is proposed to reduce the inductor current ripple for the qZSI, in which the maximum inductor current ripple is limited by making full use of the operational states. The proposed ZSVM6 strategy keeps the total ST time in a switching cycle while maintaining the axis-symmetry feature of the inductor current, but reduces the current ripple. Simulations and experimental results confirm effectiveness of the proposal when compared with the conventional ZSVM6 strategy for ripple current reduction.

Analysis of Freewheeling State in Z-Source Inverter under Three-Phase Shoot-Through Mode

Analysis of Circuit Path and Current Stress of Power Devices under Shoot-Through Mode in Z-Source Inverter

Inductor Current Ripple Analysis and Reduction for Quasi-Z-Source Inverters With an Improved ZSVM6 Strategy

Impedance Network Impact on the Controller Design of the QZSI for PV Applications

Modeling And Control Of Single-Phase Quasi-Z-Source Inverters

Impact of Space Vector Modulation Strategies on the Reliability of Impedance-Source Inverters

Small-Signal Modeling And Experimental Validation Of The Three-Phase Quasi-Z-Source Inverter

Zero-Voltage-Switching Sinusoidal Pulsewidth Modulation Method for Three-Phase Four-Wire Inverter

Generalized Space Vector Modulation for Ripple Current Reduction in Quasi-Z-Source Inverters

Analysis and experimentation of a new three-phase multilevel current-source inverter

Overview of Space Vector Modulations for Three-Phase Z-Source/Quasi-Z-Source Inverters

Analysis and Design of Snubber Circuit for Z-source Inverter

Characteristic Analysis of the Grid-Connected Impedance-Source Inverter for PV Applications

Analysis of Z-Source Inverters in Wireless Power Transfer Systems and Solutions for Accidental Shoot-Through State

Common-Mode Voltage Analysis and Reduction for the Quasi-Z-Source Inverter with a Split Inductor

Principle And Implementation Of The Shoot-Through Current Reconstruction Using Combined Current Sensing In The Quasi-Z-Source Inverter

Critical Parameter Analysis and Design of the Quasi-Z-Source Inverter

Study on Simulation of Three-Phase Z-Source Inverter for Grid-Connected Wind Power Generation

Small-Signal Modeling and Dynamic Analysis of the Quasi-Z-Source Converter.

A Switched Quasi-Z-Source Inverter with Continuous Input Currents

A New Three-Phase 5-Level Current-Source Inverter