Abstract:We have constructed heterojunction iodide ligand PbS quantum dot (QD) and ZnO nanowire (NW) solar cells. In these interdigitated structures, PbS QDs are well-embedded within ZnO NWs grown on a dense ZnO layer. A Au back contact is directly formed on the iodide ligand PbS QD surface layer. In the widely studied colloidal QD-based heterojunction solar cells, the PbS QD active layer is sandwiched between the hole-blocking layer (or electron-accepting layer) and the electron-blocking layer (EBL) (or hole-transport layer). In contrast, our solar cells contain no EBL except an additional thin PbS QD capping layer, which was deposited on the interdigitated layer to ensure the complete infiltration of the PbS QDs, and prevent shortening between the ZnO NWs and Au back contact. The interdigitated layer was constructed using a layer-by-layer dip-coating method to achieve sufficient infiltration of PbS QDs in the ZnO NWs. Owing to highly efficient charge separation in the interdigitated structure, our cell achieved a high external quantum efficiency in the visible and infrared regions, despite using only iodide ligand PbS QDs. Using cross-sectional Kelvin probe force microscopy, we confirmed that the PbS QD capping layer formed between the ZnO NW and Au back contact intrinsically functioned as an EBL. Consequently, the solar cells with ZnO NWs and iodide ligand PbS QDs maintained their performance after 500 days of storage in air without encapsulation. This stability performance surpasses most of the previously reported solar cells with PbS QDs. An encapsulated 1.0 cm2 solar cell maintained its power output for over 75 h under continuous one-sun illumination with no significant degradation. The proposed solar cell architecture with an automatically embedded EBL can realize highly efficient and stable colloidal QD-based solar cells. Moreover, the interdigitated architecture concept can be extended to various organic and inorganic hybrid solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00723?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00723</a>.Chemicals and reagents, synthesis of PbS CQDs, synthesis of ZnO NWs, list of previous works on the NW-PbS quantum dot solar cells, best solar cell performance parameters of <a class="internalNav" href="#fig1">Figure </a><a class="internalNav" href="#fig1">1</a>, AFM images of the ZnO NW/PbS QD interdigitated layer and those with different capping layers, performance parameters of solar cells with the optimal EDT-EBL thickness and ZnO NW length, KFM measurement conditions, temperature dependence of I–V characteristics of the solar cells, and solar cell characteristics measured in the course of the air stability test (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00723/suppl_file/ae1c00723_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Reduction of Charge Recombination in PbS Colloidal Quantum Dot Solar Cells at the Quantum Dot/zno Interface by Inserting a MgZnO Buffer Layer

Role of the ZnO electron transport layer in PbS colloidal quantum dot solar cell yield

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Sn-Doped Zinc Oxide as an Electron Transporting Layer for Enhanced Performance in PbS Quantum Dot Solar Cells

Efficient PbS Quantum Dot Solar Cells Employing a Conventional Structure

Unraveling the Organic and Inorganic Passivation Mechanism of ZnO Nanowires for Construction of Efficient Bulk Heterojunction Quantum Dot Solar Cells

Matching Charge Extraction Contact for Infrared PbS Colloidal Quantum Dot Solar Cells (Small 1/2022)

Probing and Controlling Surface Passivation of PbS Quantum Dot Solid for Improved Performance of Infrared Absorbing Solar Cells

ZnO/SrTiO3, ZnO/WO3, and ZnO/Zn2SnO4 Bilayer as Electron Transport Layers for Lead Sulfide Colloidal Quantum Dots Solar Cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction (adv. Energy Mater. 35/2022)

Improved current extraction from ZnO/PbS quantum dot heterojunction photovoltaics using a MoO3 interfacial layer

Potentiation of carcinostasis by combinations of thioguanine and 6-mercaptopurine.

Enhancing the absorbance and carrier extraction of lead sulfide quantum dot solar cells by the bilayer ZnO with a self‐assembly optical structure

Highly Stable Interdigitated PbS Quantum Dot and ZnO Nanowire Solar Cells with an Automatically Embedded Electron-Blocking Layer

Boosting the performance of eco-friendly quantum dots-based photoelectrochemical cells via effective surface passivation

Alloyed (Cu2SnS3)x(ZnS)1−x quantum dots as a hole-transporting layer for efficient and stable perovskite solar cells

Interdot Lead Halide Excess Management in PbS Quantum Dot Solar Cells

Solid‐State Ligand‐Exchange Fabrication of CH3NH3PbI3 Capped PbS Quantum Dot Solar Cells

Synergistic Recombination Suppression by an Inorganic Layer and Organic Dye Molecules in Highly Photostable Quantum Dot Sensitized Solar Cells.

Ultra‐Thin SnOx Buffer Layer Enables High‐Efficiency Quantum Junction Photovoltaics