Abstract:Several models were developed in the literatures for studying the system impedance characteristics during sub-synchronous oscillations (SSO). However, the doubly-fed induction generator (DFIG) impedance presents a 2 × 2 matrix with the frequency coupling component at the off-diagonal position, which increases the difficulty for analyzing the impedance characteristics of DFIG. The coupling effect in this case is caused by the asymmetric impedance characteristics of controllers, which are composed of voltage source converters (VSCs). Accordingly, simplifications are often conducted to decouple the impedance matrix into single sequences. Outer loop controller and phase-locked loop (PLL), which are often neglected in simplifications, are the main causes of the asymmetry of impedance matrix. Such simplifications could also hamper proper system stability analyses. In this paper, a comprehensive impedance model is proposed in which the outer loop controller, PLL, and grid-side controller (GSC) are all considered. The proposed comprehensive impedance model can provide exact stability data, in which stable boundaries for compensation level and transmission distances are presented. Furthermore, the proposed model is converted to simplified models in which the impacts of outer loop controller, PLL, GSC and coupling components on boundary stability of SSO are analyzed. The results are validated by time domain simulations and eigenvalue analyses, and deviations of the simplified models are analyzed for different operating parameters and conditions leading to simplifications.

Damping Dfig-Associated Ssr by Adding Subsynchronous Suppression Filters to Dfig Converter Controllers

Damping DFIG-associated SSR with Subsynchronous Suppression Filters: A Case Study on a Practical Wind Farm System

SSR Analysis of DFIG-Based Wind Farm With VSM Control Strategy

Impedance-model-based SSR Study Considering DFIGs at Different Locations

Impedance Modeling and Analysis for DFIG-Based Wind Farm in SSO Studies

Damping subsynchronous resonance in series-compensated wind farms by adding notch filters to DFIG controllers

Study on the Influencing Factors and Mechanism of SSR Due to DFIG-based Wind Turbines to a Series Compensated Transmission System.

Mitigation of SSR by Embedding Subsynchronous Notch Filters into DFIG Converter Controllers

Analysis and Mitigation of Sub-Synchronous Resonance for Doubly Fed Induction Generator under VSG Control

Stator Current Harmonic Control with Resonant Controller for Doubly Fed Induction Generator

Damping Method of High-Frequency Resonance for Stator Current Controlled DFIG System under Parallel Compensation Grid

Centralised Solution for Subsynchronous Control Interaction of Doubly Fed Induction Generators Using Voltage-Sourced Converter

A small-signal impedance method for analyzing the SSR of series-compensated DFIG-based wind farms

A Mechanism Study of SSR for Multiple DFIG Wind Generators Connected to a Series-Compensated Power System

Hardware-in-the-Loop and Field Validation of a Rotor-Side Subsynchronous Damping Controller for a Series Compensated DFIG System

Collaborative Control and Allocation Method of RSC and GSC for DFIG System to Suppress High-Frequency Resonance and Harmonics

Resonance Active Damping and PCC Voltage Quality Improvement of DFIG System Connected to Parallel Compensated Grid

Mitigating Subsynchronous Oscillation Using Model-Free Adaptive Control of DFIGs

Supplementary Damping Control of STATCOM to Mitigate SSCI

Method of Eliminating High Frequency Resonance of DFIG System Connected to Weak Grid

Investigation of Ssr in Practical Dfig-Based Wind Farms Connected to A Series-Compensated Power System