Abstract:Undecorated and Pt-decorated SnO2 nanoparticles (NPs) were prepared using sol-gel and hydrothermal methods. The tin dioxide NPs, as sensing materials, were screen printed on alumina substrates with Pt test electrode to fabricate the gas sensors. The characteristics of these gas sensors in terms of composition, morphology, and sensing property were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and electrochemical workstation, respectively. The results elucidated that the response time of Pt-decorated SnO2 sensor to 100 ppm H-2 is 29 s at 350 degrees C, which is almost half of that of pure SnO2 gas sensor. Meanwhile, the effect of operating temperature and Pt decorating on the sensing properties and the 'n' value is studied. Comparing with many fabricated H-2 gas sensors, our as-prepared sensor exhibits not only a high response time but also detects H-2 gas down to 0.08 ppm. To the author's best knowledge, the detection limit of 0.08 ppm is the best reported detection limit for the gas sensors based on tin oxide NPs so far. Moreover, there is a significant enhancement in the selectivity of Pt-decorated SnO2 sensor to the H-2 gas against other investigated gases such as carbon monoxide (CO), methane (CH4), nitrogen dioxide (NO2), sulfur dioxide (SO2). Overall, the obtained results clearly demonstrate that the Pt-decorated SnO2 is an excellent sensing material for the fabrication of gas sensors and the detection of trace concentration of H-2 down to 0.08 ppm. Furthermore, the results of statistical and fractal analysis on 2D microstructures of FESEM images showed a coefficient correlation of about 0.991 for all the samples. (C) 2019 Elsevier B.V. All rights reserved.

Highly Sensitive Chemical Detection with Tunable Sensitivity and Selectivity from Ultrathin Platinum Nanowires

Single‐Crystal Pd and Its Alloy Nanowires for Plasmon Propagation and Highly Sensitive Hydrogen Detection

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Bimetallic AuPt Alloy Nanoparticles Decorated on ZnO Nanowires Towards Efficient and Selective H2S Gas Sensing

The distinguished hydrogen sensibility by selecting diameters of single-walled carbon nanotubes and adding sensitive materials

Polyaniline/polystyrene single-nanowire devices for highly selective optical detection of gas mixtures.

A trace ppb-level electrochemical H2S sensor based on ultrathin Pt nanotubes

Surface fully functionalized metal chalcogenide nanowires for highly sensitive H2S sensing

High-temperature Hydrogen Sensor Based on Platinum Nanoparticle-Decorated SiC Nanowire Device

Simultaneously-Engineered Composition and Spatial Position of Metal/Metal-Oxide Nanowires for Hydrogen Sensing Applications

Hydrogen Gas Sensing with Networks of Ultrasmall Palladium Nanowires Formed on Filtration Membranes.

Highly Sensitive Ammonia Gas Detection at Room Temperature by Integratable Silicon Nanowire Field-Effect Sensors

Self-Heated Hydrogen Gas Sensors Based on Pt-Coated W18o49 Nanowire Networks with High Sensitivity, Good Selectivity and Low Power Consumption

Nanoparticle-functionalized microsensors for room-temperature hydrogen detection

Nano-Schottky Junction-Engineered Pd/SnO2 Nanotube Array for Ultrasensitive Hydrogen Sensing at Room Temperature

Cu2O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide

Design of P–p Heterojunctions Based on CuO Decorated WS2 Nanosheets for Sensitive NH3 Gas Sensing at Room Temperature

Ultra-high Sensitive Micro-Chemo-mechanical Hydrogen Sensor Integrated by Palladium-Based Driver and High-Performance Piezoresistor

Fabrication of Heterostructured P-Cuo/n-sno2 Core-Shell Nanowires for Enhanced Sensitive and Selective Formaldehyde Detection

Highly Selective Detection of Hydrogen Sulfide by Simple Cu-CNTs Nanocomposites

A Highly Sensitivity and Selectivity Pt-SnO2 Nanoparticles for Sensing Applications at Extremely Low Level Hydrogen Gas Detection