Abstract:Additive manufacturing allows to widely control the geometrical features of implants. Recently, we described the fabrication of calcium phosphate cement (CPC) scaffolds by 3D plotting of a storable CPC paste based on water-immiscible carrier liquid. Plotting and hardening is conducted under mild conditions allowing the (precise and local) integration of biological components. In this study, we have developed a procedure for efficient loading of growth factors in the CPC scaffolds during plotting and demonstrated the feasibility of this approach. Bovine serum albumin (BSA) or vascular endothelial growth factor (VEGF), used as model proteins, were encapsulated in chitosan/dextran sulphate microparticles which could be easily mixed into the CPC paste in freeze-dried state. In order to prevent leaching of the proteins during cement setting, usually carried out by immersion in aqueous solutions, the plotted scaffolds were aged in water-saturated atmosphere (humidity). Setting in humidity avoided early loss of loaded proteins but provided sufficient amount of water to allow cement setting, as indicated by XRD analysis and mechanical testing in comparison to scaffolds set in water. Moreover, humidity-set scaffolds were characterised by altered, even improved properties: no swelling or crack formation was observed and accordingly, surface topography, total porosity and compressive modulus of the humidity-set scaffolds differed from those of the water-set counterparts. Direct cultivation of mesenchymal stem cells on the humidity-set scaffolds over 21days revealed their cytocompatibility. Maintenance of the bioactivity of VEGF during the fabrication procedure was proven in indirect and direct culture experiments with endothelial cells. Statement of significance: Additive manufacturing techniques allow the fabrication of implants with defined architecture (inner pore structure and outer shape). Especially printing technologies conducted under mild conditions allow additionally the (spatially controlled) integration of biological components such as drugs or growth factors. That enables the generation of individualized implants which can better meet the requirements of a patient and of tissue engineering constructs. To our knowledge, simultaneous printing of biological components was up to now only described for hydrogel/biopolymer-based materials which suffer from poor mechanical properties. In contrast, we have developed a procedure (based on 3D plotting of a calcium phosphate cement paste) for the fabrication of designed and growth factor loaded calcium-phosphate-based scaffolds applicable for bone regeneration.

In Situ Delivery of Rhbmp-2 in Surface Porous Shape Memory Scaffolds Developed Through Cryogenic 3D Plotting

Rapid Printing of 3D Porous Scaffolds for Breast Reconstruction

Cryogenic 3D Printing for Producing Hierarchical Porous and Rhbmp-2-loaded Ca-P/PLLA Nanocomposite Scaffolds for Bone Tissue Engineering.

Digital Light Processing-Based 3D Printing of Cell-Seeding Hydrogel Scaffolds with Regionally Varied Stiffness

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

3D plotting of growth factor loaded calcium phosphate cement scaffolds

Cryogenic 3D printing of dual-delivery scaffolds for improved bone regeneration with enhanced vascularization

3D-printed scaffolds for tissue engineering applications using thermosensitive hydrogels based on biopolymer blends

A Versatile In Situ Precipitation Assisted Direct-Write-3D Printing Strategy for Skinless Hierarchical Porous Polymeric Scaffolds

Water-based polyurethane 3D printed scaffolds with controlled release function for customized cartilage tissue engineering

Cryogenic 3D printing of heterogeneous scaffolds with gradient mechanical strengths and spatial delivery of osteogenic peptide/TGF-β1 for osteochondral tissue regeneration.

3D printing facilitated scaffold-free tissue unit fabrication

4D printed hydrogel scaffold with swelling-stiffening properties and programmable deformation for minimally invasive implantation

Direct 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth

Direct Integration of 3D Printing and Cryogel Scaffolds for Bone Tissue Engineering

Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting

Cultivation of hierarchical 3D scaffolds inside a perfusion bioreactor: scaffold design and finite-element analysis of fluid flow

Improved in situ seeding of 3D printed scaffolds using cell-releasing hydrogels

Fabrication of 3D Printed PCL/PEG Polyblend Scaffold Using Rapid Prototyping System for Bone Tissue Engineering Application

Low temperature hybrid 3D printing of hierarchically porous bone tissue engineering scaffolds with in situ delivery of osteogenic peptide and mesenchymal stem cells

A Novel Poly (Lactic-Co-Glycolic Acid)-Collagen Hybrid Scaffold Fabricated Via Multi-Nozzle Low-Temperature Deposition