Abstract:Research and development of power factor corrector (PFC) for AC/DC converters of single-phase AC power supply network are discussed within this article. Two-channel bridgeless PFC is proposed in this paper. The proposed converter allows us to lower current DC component generation in the power network and to reduce static and dynamic losses of semiconductor devices. The suggested solution characteristic features are the absence of a diode bridge while using two identical converters operating in different power network voltage half periods. Due to cumulative chokes in each converter, the function setting the consumption current sinusoidal form is realized with the ability of wide-range output voltage regulation. A number of Simulink-models have been developed in order to study operating modes and to test control algorithms of the proposed bridgeless PFC. The input current harmonic content, efficiency coefficient, passive elements' electrical parameters, and output voltage pulsation coefficient of the proposed bridgeless PFC were researched by Simulink-models. The results obtained show the efficiency of the proposed solutions regarding PFC. The THD value does not exceed 1.3% in steady state mode and is not over 4% during the voltage stabilization process; the minimal value of the output voltage pulsation coefficient is 3.1%. The suggested solutions can be applied in accumulator batteries' charging sets and DC motors' reduced-current start.

A Novel Bridgeless Buck Pfc Converter With Half Dead Zones

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

New Bridgeless Buck PFC Converter with Improved Input Current and Power Factor

A Novel Bridgeless Cuk PFC Converter With Further Reduced Conduction Losses and Simple Circuit Structure

Single-Phase Single-Stage Isolated ZCS Current-Fed Full-Bridge Converter for High-Power AC/DC Applications

Research on A Novel Three-Phase Single-Stage Boost Dcm Pfc Topology and the Dead Zone of Its Input Current

High Power Factor Bridgeless Integrated Buck-Type PFC Converter With Wide Output Voltage Range

A novel three-phase seven-level active clamped converter using H-bridge as a level doubling network

A Family of Single-Phase Hybrid Step-Down PFC Converters

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

A ZCS AC/DC CONVERTER WITH HIGH POWER FACTOR BASED ON PWM CONTROL STRATEGY

Single Stage PFC Circuit with Full Bridge Structure

Totem-Pole Boost Bridgeless PFC Rectifier With Simple Zero-Current Detection and Full-Range ZVS Operating at the Boundary of DCM/CCM

A novel single-phase active-clamped ZVT-PWM PFC converter

Design Considerations of Soft-Switched Buck PFC Converter With Constant On-Time (COT) Control

Natural Power Factor Correction and Soft Switching Design for a Single-Stage Bidirectional Dual Active Bridge AC–DC Converter

A high-efficiency single-phase AC/DC converter with enabling window control and active input bridge

Performance Evaluation and Analysis of a Combined Quasi-Two-stage Bridgeless PFC Converter.

Analysis and Design of a ZVS Boost/buck-Boost Dual Mode PFC Converter with Universal Input and Wide Output Voltages

Bridgeless Star Power Factor Correction Architecture

Design and Implementation of Bridgeless Power Factor Corrector with Low Static Losses