Abstract:Since power systems with a DC distribution method has many advantages, such as conversion efficiency increase of about 5–10%, cost reducing by about 15–20% and so on, the AC distribution power system will be replaced by a DC distribution one. This paper presents a DC load power system for a DC distribution application. The proposed power system includes two converters: DC/DC converter with battery source and power factor corrector (PFC) with a line source to increase the reliability of the power system when renewable energy or energy storage equipment are adopted. The proposed PFC adopts a bridgeless flyback converter to achieve power factor correction for supplying power to DC loads. When the bridgeless flyback converter is used to achieve PFC, it needs two transformers to process positive and negative half periods, respectively. In order to increase conversion efficiency, the flyback one can add two sets of the active clamp circuit to recover energies stored in leakage inductances of transformers in the converter. Therefore, the proposed bridgeless flyback converter can not only integrate two transformers into a single transformer, but also share a clamp capacitor to achieve energy recovery of leakage inductances and to operate switches with zero-voltage switching (ZVS) at the turn-on transition. With this approach, the proposed converter can increase conversion efficiency and decrease component counts, where it results in a higher conversion efficiency, lower cost, easier design and so on. Finally, a prototype with a universal input voltage source (AC 90–265 V) under output voltage of 48 V and maximum output power of 300 W has been implemented to verify the feasibility of the proposed bridgeless flyback converter. Furthermore, the proposed power system can be operated at different cases among load power PL, output power PDC1 of DC/DC converter and output power PDC2 of the proposed PFC for supplying power to DC loads.

New Bridgeless Buck PFC Converter with Improved Input Current and Power Factor

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

High Power Factor Bridgeless Integrated Buck-Type PFC Converter With Wide Output Voltage Range

A Novel Bridgeless Cuk PFC Converter With Further Reduced Conduction Losses and Simple Circuit Structure

An improved control scheme for buck PFC converter for high efficiency adapter application

High efficiency PFC with Enabling Window Control and active input bridge

Design and Analysis of Single-Stage Power Factor Correction Converter with a Feedback Winding

Single-stage Power Factor Correction Converter with Coupled Input Current Shaping Inductor

A high efficiency bridgeless flyback PFC converter for adapter application

A Current Spike Reduction Method for Totem-pole Bridgeless PFC at Zero-crossing

A high-efficiency single-phase AC/DC converter with enabling window control and active input bridge

A Family of Single-Phase Hybrid Step-Down PFC Converters

Single-Stage Integrated Buck-Flyback PFC Converter With Low Total Harmonic Distortion Control

A ZCS AC/DC CONVERTER WITH HIGH POWER FACTOR BASED ON PWM CONTROL STRATEGY

Design Considerations of Soft-Switched Buck PFC Converter With Constant On-Time (COT) Control

Design and Implementation of Bridgeless Power Factor Corrector with Low Static Losses

An Optimal Peak Current Mode Control Scheme for Critical Conduction Mode (crm) Buck Pfc Converter

Power Factor Corrector with Bridgeless Flyback Converter for DC Loads Applications

Bridgeless Star Power Factor Correction Architecture

Bridgeless PFC Topology Simplification and Design for Performance Benchmarking

Natural Power Factor Correction and Soft Switching Design for a Single-Stage Bidirectional Dual Active Bridge AC–DC Converter