Abstract:A high-selectivity bandpass filter (BPF) based on two merged ring resonators is presented in this paper. The structure of this proposed BPF can be seen as the two one-wavelength ring resonators merged each other by sharing the common lambda(g)/2 microstrip line. Due to symmetric structure, it can be analyzed by even- and odd-mode method and the locations of six transmission zeros are calculated using input impedance deductions. For further demonstration, a BPF example centered at 2 GHz is fabricated with high frequency selectivity. The measured 3-dB fractional bandwidth is 11% (1.89-2.11 GHz) and insertion loss is less than 2 dB in the passband. Good agreement between simulation and measurement verifies the feasibility of the design method. this method is at the expense of a large circuit size. Besides, several novel structures are introduced to achieve higher performance, such as two pairs of twist modified split-ring resonators [8] and stepped impedance open-stub loaded ring resonator [9]. In this paper, a BPF based on two merged ring resonators with high selectivity is proposed, which is quite different from the BPF using ring resonators in [10]. Due to the symmetric structure of this proposed BPF, the distributions of six TZs can be calculated by odd-and even-mode method. The theoretical derivation of the proposed BPF is demonstrated. For validation, a BPF example centered at 2 GHz is fabricated and measured.

Bandpass Filters with Improved Selectivity Based on Dual-Mode Ring Resonators

Bandpass Filter Loaded With Open Stubs Using Dual-mode Ring Resonator

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

High Selectivity Bandpass Filter-Integrated SPDT Switch Using Switchable Dual-Mode Hybrid Resonators

Dual-Band Bandpass Filters Using A Novel Quad-Mode Stub-Loaded Ring Resonator

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Microstrip Multi-Band Bandpass Filters Using a Single Improved Ring Resonator

A Dual-Band Bandpass Filter Using a Single Dual-Mode Ring Resonator

Compact Wideband Differential Bandpass Filters Using Half-Wavelength Ring Resonator

Balanced filters with wideband common mode suppression using dual-mode ring resonators

Wideband Filtering Crossover Using Dual-Mode Ring Resonator

Design of Dual-Mode Bandpass Filter Using Semi-ring

Dual-Band Bandpass Filter With Good Selectivity And Stopband Rejection

High selectivity dual-band bandpass filter with flexible passband frequencies and bandwidths

A High Selectivity Dual‐band Bandpass Filter Using Quadruple‐mode Multi‐stub Loaded Ring Resonator (SLRR)

The Design of Dual-Band Bandpass Filter Based-on Dual-Mode Open-Loop Resonator

High-Selectivity Wideband Balanced Bandpass Filters Using Symmetrical Multi-Mode Resonators

Planar dual- and tri-band bandpass filters using single improved ring resonator and simple feed scheme

New Dual-Band Open-Loop Resonator Bandpass Filters with Controllable Bandwidths and Transmission Zeros

High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators