Abstract:With the continuous development of silicon-based optoelectronic chips, their high-power applications in communication, ranging, and other fields are gradually increasing. However, the nonlinear effects of silicon (Si) cause significant output power loss when the input optical power surpasses a certain threshold. This nonlinear relationship between the input optical power and the chip's output power reduces its working performance. Therefore, the importance of regulating the nonlinear phenomena of the chip gradually becomes prominent. In this regard, Sb2Se3 is an excellent material. We propose a scheme to improve the nonlinear power threshold by depositing crystalline Sb2Se3 (c-Sb2Se3) on the top of Si waveguides. Noted that optical loss caused by nonlinear absorption can be depressed by the c-Sb2Se3 film, as well as loss compensation is proportional to the length of the c-Sb2Se3 film deposited. This article theoretically analyzes the characteristics of Sb2Se3, which material can compensate for the nonlinear effect of Si during high-power operation of Si chips. This compensation increases the optical power threshold of nonlinear excitation and is nonvolatile. C-Sb2Se3 films with different lengths (from 15 μm to 60 μm) were deposited on Si waveguides and Si microring resonators with different coupling gap (from 0.2 μm to 0.35 μm) respectively. The results demonstrate a significant improvement in the device's optical nonlinear power threshold. Furthermore, as the length of the c-Sb2Se3 film increases, the optical nonlinear power threshold increases more significantly.

Influence of electrode materials and structural design on third-order nonlinear signals of SAW devices

Influence of Electrode Width of Interdigital Transducer on Third-Order Nonlinear Signals of SAW Devices on 42°Yx-Litao3 Substrate

Influence of electrode structure on generation of third-order nonlinearity in surface acoustic wave devices

Influence of Electrode Width of Interdigital Transducer on Third-Order Nonlinearity of Surface Acoustic Wave Devices on 42°Yx-Litao3 Substrate

Study On Generation Mechanisms Of Third-Oder Nonlinearity In Saw Devices

Discussion about Generation Mechanisms of Third-Order Nonlinear Signals in Surface Acoustic Wave Resonators Based on Simulation

Impact of Nonlinear Effects on the Silicon-Based Waveguides and Microring Resonators

Conductivity and Optical Nonlinearity of Sb Doped Sno2 Films

Study on Generation Mechanisms of Second-Order Nonlinear Signals in Surface Acoustic Wave Devices and Their Suppression

Investigation of Nonlinearity in RF Metal Contacts Induced by the Tunneling Effect

Mechanisms of Third-order Harmonic in TC-SAW Resonators Using a Nonlinear FEM Model

Analysis Of Rayleigh-Mode Spurious Response Using Finite Element Method/Spectrum Domain Analysis For Surface Acoustic Wave Resonator On Nonflat Sio2/Al/Linbo3 Structure

Analysis of Rayleigh-Mode Spurious Response Using Finite Element Method/Spectrum Domain Analysis for Surface Acoustic Wave Resonator on Nonflat SiO<sub>2</sub>/Al/LiNbO<sub>3</sub> Structure

Nonlinear Regulation on Silicon Photonic Chips Based on Sb2Se3 Thin Films

First-Order Perturbation Analysis of Nonlinear Signal Generation in Surface Acoustic Wave Resonators on LiTaO3/SiO2/Si Structure Based on Coupling-of-Modes Theory.

Research in Nonlinearity of Surface Acoustic Wave Devices

Spurious-Free Shear-horizontal SAW Resonators Using LiTaO<inf>3</inf>/SiO<inf>2</inf>/Si Substrate

Alignment angle dependent strain sensitivity of SAW resonator

温度补偿型声表面波谐振器的非线性分析

Spurious-Free Shear-horizontal SAW Resonators Using LiTaO3/SiO2/Si Substrate

Suppression of Transverse-Mode Spurious Responses by Selectively SiO2 Removing Technique for SAW Resonators on a SiO2/Al/LiNbO3 Structure