Abstract:The thermal performance parameters of an improved heat exchanger tube fitted with various vortex generator inserts were investigated using numerical and experimental methods. The governing equations have been solved numerically by a Finite Volume approach employing the turbulence model ( κ - ε ). Two twisted tape types, which being inserted across a circular pipe (plain twisted tape) and (Double V-cut twisted tape), have been achieved. The hybrid nanofluid is prepared by using metal oxide [Al2O3+CuO] with distilled water at volume fraction range (0.6%, 1.2% and 1.8%), Reynolds number range (3560-8320) at twisted ratio (9.25). The experimental data for a plain tube, plain twisted tapes and double v-cut twisted tape are validated using the standard correlations available in the literature. The effect of such variables upon the average Nusselt number, friction factor, and thermal performance factor have been investigated and compared with a plain tube at the same conditions. As compared to plain twisted tape, the tube equipped with a double V-cut twisted tape with hybrid nanofluid displayed increased thermal performance. The greater vortex flow induced by the V-cuts results in more active thermal boundary layer disturbance, resulting in a greater heat transfer rate. The results show that thermal performance factor for hybrid nanofluid in plain circular tube at ( ∅ = 1.8 %) and Reynolds number (8320) is about (1.068), when the plain twisted tape and double v-cut twisted tape inserted with hybrid nanofluid the thermal performance factor increased to (1.33) and (1.37), respectively. The results show a similar trend for both numerical and experimental cases. The comparison between the experimental and numerical results have maximum error was (9.7)%.

Experimental Study on the Heat Transfer Enhancement by the Combination of Transverse Groove Tube and Twisted Tape Inserts

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Experimental investigation on effect of perforated double V-cut twisted tape on thermo-hydraulic characteristics of heat exchanger tube

Heat transfer enhancement in turbular heat exchanger fitted with twin twisted tape swirl generators

Optimization of thermohydraulic performance of tube heat exchanger with L twisted tape

Progress of Passive Enhanced Heat Transfer Tubes

A comprehensive analysis of heat transfer in a heat exchanger with simple and perforated twisted tapes based on numerical simulations

Experimental investigation of drumet-cut twisted tape inserts on performance enhancement of heat exchanger tube in turbulent flow

Study on Simulation of Heat Transfer Tubes with Twisted-Tape Inserted

Evaluation of thermal performance factor by hybrid nanofluid and twisted tape inserts in heat exchanger

Experimental Investigation on Thermo-Hydraulic Performance of Heat Exchanger Tube with Solid and Perforated Circular Disk Along with Twisted Tape Insert

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

Study on shell side heat transport enhancement of double tube heat exchangers by twisted oval tubes

Effect of porous density of twisted tape inserts on heat transfer performance inside a closed conduit

Tapered Twisted Tape Inserts for Enhanced Heat Transfer

Numerical investigation of convective heat transfer enhancement by a combination of vortex generator and in-tube inserts

Heat transfer enhancement and optimization of a tube fitted with twisted tape in a fin-and-tube heat exchanger

Visualization experiment and thermal-hydraulic behaviour of assembled self-rotating twisted tape in double-pipe heat exchangers

Numerical study on enhanced heat transfer and friction factor characteristics of helical bead-groove tube

Numerical Studies on Thermo-Hydraulic Characteristics of Turbulent Flow in a Tube with a Regularly Spaced Dimple on Twisted Tape