Abstract:The nanowire gate-all-around (GAA) structures with the nearly ultimate channel electrostatic integrity of the gate field can exhibit the best immunity to the short channel effect and drain-induced barrier lowering. Moreover, owing to the enhanced control efficiency of gate over the tunneling junction, the GAA-TFET also gives improved subthreshold swing and on-state current. Despite the excellent device performance, an accurate model is very significant for the practical application. Compared with the numerical methods which are usually time consuming and computationally inefficient, an analytical model could accelerate the device investigation and circuit design process. Even though some tunneling current models have already been reported for nanowire tunneling field-effect-transistors (TFETs), the model of the terminal capacitance is still an issue for nanowire TFETs. The capacitance is of great significance for the transient simulation. In this paper, a physical and analytical potential model considering both the source depletion region and the channel mobile charges, is developed for the GAA-TFETs. The results from the model are verified with the numerical simulations, and the excellent agreement between the two results indicates the validation of the proposed model. Based on the potential model, the terminal charge model and the capacitance model are further developed and also verified by the numerical simulations. The main inflection and variation of the terminal charges and capacitances with the biases can be predicted by our model. Besides, both the model results and the numerical simulations both demonstrate that the gate charge is dominated mainly by the drain charges and the contribution of the source charges can be almost neglected. This also leads to the very small gate-source capacitance and very large Miller capacitance in the TFET device. This will be detrimental to the performance of TFET-based digital circuits but can be mitigated with the hetero-oxide gate structure. The second order effects, such as the quantum confinement and traps, are ignored in this paper and can be taken into the core model in the future work. It should also be noted that there is no iterative process involved during the model derivation, thus the developed model can be easily applied to the widely used SPICE platform and will be useful in designing and investigating the GAA-TFET based circuits.

Nanoscale Capacitance: A Quantum Tight-Binding Model

Nanoscale capacitance: a classical charge-dipole approximation

Measurement of the combined quantum and electrochemical capacitance of a carbon nanotube

Electrical Modeling of Multi-Walled Carbon Nanotube (Mwcnt)-Based Capacitors for High-Density RF Integration

Limiting and Overlimiting Conductance in Field-Effect Gated Nanopores

Understanding Capacitance Variation in Sub-Nanometer Pores by In-Situ Tuning of Interlayer Constrictions.

Capacitance Model for Nanowire Gate-All-around Tunneling Field-Effect-transistors

A Charge-Based Capacitance Model for Double-Gate Tunnel FETs With Closed-Form Solution

Nonlinear Quantum Capacitance

Influence of the Quantum Capacitance on Electrolyte Conductivity through Carbon Nanotubes

Electrosorption Capacitance of Nanostructured Carbon-Based Materials

Electrochemical capacitance of a leaky nano-capacitor

Simulating Capacitances to Silicon Quantum Dots: Breakdown of the Parallel Plate Capacitor Model

Capacitance modeling of complex topographical silicon quantum dot structures

Quantum capacitance governs electrolyte conductivity in carbon nanotubes

Accounting for the Quantum Capacitance of Graphite in Constant Potential Molecular Dynamics Simulations

Simulating the charging mechanism of a realistic nanoporous carbon-based supercapacitor using a fully polarizable model

Monte Carlo study of coaxially gated CNTFETs: capacitive effects and dynamic performance

Density Functional Theory Study of the Capacitance of Single File Ions in a Narrow Cylinder.

Lattice Boltzmann Electrokinetics simulation of nanocapacitors

Investigation of Schottky–Barrier Carbon Nanotube Field-Effect Transistor by an Efficient Semi-Classical Numerical Modeling