Abstract:Underwater gas-bubble manipulation in aqueous environments is of great importance in industry and academia. Although the underwater gas bubble has been proved to be directionally transportable by various structures, transporting gas bubbles in 3D space remains a challenge. In this research, two kinds of tapered pillars, that is, ladderlike and helical ladderlike, were proposed for manipulating gas bubbles. To fabricate such unique structures, an improved alternative coating and etching method was developed. To meet the requirements of underwater gas-bubble transport, a modified gas-bubble slippery technology was also developed to enhance the aerophilic ability. The dynamics of the gas bubble was analyzed using a high-speed camera. The Laplace force that resulted from the geometry gradient was found to play a significant role in tuning the gas-bubble velocity. Through adjustments on the wettability, tilt angle, and geometry of each section of the tapered pillar, tuning the transport velocity from 113.9 ± 10.3 to 309.1 ± 5.8 mm/s becomes possible. On the basis of these findings, the helical ladderlike tapered pillar was fabricated and demonstrated to be able to transport gas bubbles in 3D space. These results may provide a new and systematic way to design and fabricate materials and structures for directional gas-bubble transport in 3D space.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13631?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13631</a>.Energy consumption analysis, Reynolds number (<i>Re</i>) calculation, the procedure of fabricating LTP and HLTP, chemical modification and the SEM image of the resulted sample, the duration experiment, the bubble and average transport velocity measurement, and the contrast experiment of the helical cylindrical pillar (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13631/suppl_file/am0c13631_si_001.pdf">PDF</a>)Video 1: Bubble transport on 4-section LTP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13631/suppl_file/am0c13631_si_002.avi">AVI</a>)Video 2: Bubble transport on HLTP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13631/suppl_file/am0c13631_si_003.avi">AVI</a>)This article has not yet been cited by other publications.

Fabrication of a micro through-hole array by gas-blowing a PDMS-treated polyamide screen for a flexible drag-reducing skin-like device

Rapid fabricating process of flexible PDMS- film with array micro round holes by blowing organic net framework

Fabrication of PDMS micro through-holes using micromolding in open capillaries

Drag Reduction by Bubble-Covered Surfaces Found in PDMS Microchannel Through Depressurization.

Large-Area and High-Throughput PDMS Microfluidic Chip Fabrication Assisted by Vacuum Airbag Laminator

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Micro/nanofabrication of Brittle Hydrogels Using 3D Printed Soft Ultrafine Fiber Molds for Damage-Free Demolding.

Design and Fabrication of Flexible MEMS Anti-Drag Skin

Microhole‐Arrayed PDMS with Controllable Wettability Gradient by One‐Step Femtosecond Laser Drilling for Ultrafast Underwater Bubble Unidirectional Self‐Transport

Rapid prototyping of PDMS microdevices via <i></i>PLAT on nonplanar surfaces with flexible hollow-out mask

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Air trap and removal on a pressure driven PDMS-based microfluidic device

A Facile “Air-Molding” Method for Nanofabrication

Multi-step PDMS curing and a controlled separation method for mass manufacturing of high-performance and user-friendly micro-devices: valved micropumps

Fabrication of Perforated PDMS Microchannel by Successive Laser Pyrolysis

Rapid fabrication of microdevices by controlling the PDMS curing conditions during replication of a laser-prototyped mould

A flexible strategy to fabricate trumpet-shaped porous PDMS membranes for organ-on-chip application

Porous Membrane‐Enabled Fast Liquid Metal Patterning in Thin Blind‐Ended Microchannels

Ladderlike Conical Micropillars Facilitating Underwater Gas-Bubble Manipulation in an Aqueous Environment

Fabrication of a Three-Layer PDMS Pneumatic Microfluidic Chip for Micro Liquid Sample Operation

Femtosecond Laser Induced Underwater Superaerophilic And Superaerophobic Pdms Sheets With Through Microholes For Selective Passage Of Air Bubbles And Further Collection Of Underwater Gas