Abstract:Electrodeposition is an effective approach to synthesize porous electrocatalysts; however, the impact of deposition conditions on the catalyst porosity and morphology has rarely been systematically studied. More importantly, the mass transport of CO2 is poor because the electrodes are generally fully covered by aqueous electrolytes, leading to low current densities. Hydrophobic modification can generate gas-liquid-solid interfaces that facilitate CO2 mass transport. However, the conventional superficially hydrophobic modification sacrifices the activity due to partially covered active sites, has difficulty in the uniform modification of internal pore surfaces due to large polymer size, and the surface hydrophobic sites are easily washed away. Here, we report a unique hydrogen bubble dynamic template electrodeposition method to synthesize interiorly hydrophobic ZnAg foam electrodes by physically trapping polytetrafluoroethylene (PTFE) during electrodeposition. Deposition conditions were found to influence the pore diameter and morphology. The pore diameter increases with the deposition current density and duration. The pore wall structure gradually transformed from nanodendrites at -0.5 Acm(-2) into nanosheets at -1 Acm(-2) or beyond. The resulting interiorly hydrophobic ZnAg(3A15s)-40 exhibits a maximum FECO of 97.6% and a significantly widened current density window of -5 to -50 mAm(-2) with an FECO of more than 90.4% in a microchannel reactor, which is significantly higher than those of bare ZnAg(3A15s) (-5 to -30 mAcm(-2) with an FECO more than 90.0%) and the Zn rod substrate (-5 mAcm(-2) with an FECO of 64.0%). The in situ attenuated total reflection Fourier transformed infrared (ATR-FTIR) spectroscopy suggested the hydrophobic catalyst has enhanced CO2 concentration near the inner surface, which promotes the activity of CO2 reduction to CO.

Direct Sputtering- and Electro-Deposition of Gold Coating Onto the Closed Surface of Ultralow-Density Carbon-Hydrogen Foam Cylinder

Region-selective electroless gold plating on polycarbonate sheets by UV-patterning in combination with silver activating

Reversed Preparation of Low-Density Poly(divinylbenzene/styrene) Foam Columns Coated with Gold Films

Electrochemical Fabrication of Nanoporous Gold

Investigating Gold Deposition with High-Power Impulse Magnetron Sputtering and Direct-Current Magnetron Sputtering on Polystyrene, Poly-4-vinylpyridine, and Polystyrene Sulfonic Acid

Microstructure, mechanical properties and tribological behaviors of gold coating determined by surface quality

Site‐Selective Bipolar Electrodeposition of Gold Clusters on Graphene Oxide Microsheets at a 3D Air|Liquid Interface

Fabrication of gold microelectrodes on polystyrene sheets by UV-directed electroless plating and its application in electrochemical detection

Three-Dimensional Controllable Submicron Gold Films: Sulfhydryl-Containing Molecular Assembly And Controllable Surface Plasmon Resonance And Electrocatalysis Properties

Preparation of Monolithic Foamed Gold by a Dissolvable Template Method

Fabrication of Gold Films with Single-sided Nanostructures

Deposition of the fractal-like gold particles onto electrospun polymethylmethacrylate fibrous mats and their application in surface-enhanced Raman scattering

Facile Electrochemical Approach to Fabricate Hierarchical Flowerlike Gold Microstructures: Electrodeposited Superhydrophobic Surface

Gold Sputtering at the Interfaces: An Easily Operated Strategy for Enhancing the Energy Storage Capability of Laminated Polymer Dielectrics

Nanoporous Gold Thin Film: Fabrication, Structure Evolution, and Electrocatalytic Activity

Conductive Gold Films Assembled on Electrospun Poly(methyl Methacrylate) Fibrous Mats

Thermal/Plasma-Driven Reversible Wettability Switching Of A Bare Gold Film On A Poly(Dimethylsiloxane) Surface By Electroless Plating

Nanoporous gold with microporous structure prepared by sodium dodecyl sulfate-mediated electrochemical dealloying

Increasing the Mechanical Stability of Polymer-Gold Interfacial Connection: A Parallel Covalent Strategy

Polyelectrolyte Multilayer As Matrix for Electrochemical Deposition of Gold Clusters: Toward Super-Hydrophobic Surface

Interiorly Hydrophobic Modification of Electrodeposited Self-supported ZnAg Foam Electrodes for CO2 Electroreduction in a Microchannel Reactor