Abstract:A reduced graphene oxide/TiO2 (RGO/TiO2) blocking layer in the photoanode of a dye sensitized solar cell (DSSC) was fabricated in a simple way by depositing a RGO/TiO2 paste onto a FTO substrate through screen printing method. The RGO content in the RGO/TiO2 blocking layer was optimized for better DSSC performance. The effect of the RGO/TiO2 blocking layer on the performance of the DSSC was examined based on the electrochemical impedance spectral analysis, the photocurrent-voltage measurement, and the open-circuit voltage decay technology. After the introduction of RGO/TiO2 blocking layer in the photoanode, direct contact between the electrolyte and the FTO glass surface was prevented. The electron transfer from the TiO2 film to the FTO glass substrate was thus improved, the charge recombination rate suppressed, the electron transport rate enhanced, and the electron collection efficiency increased, resulting in higher current density. At the best level of RGO in the composite blocking layer, the DSSC has an energy conversion efficiency (η) of 7.48% with a Jsc of 15.29 mA cm−2, a Voc of 0.74 V and a FF of 0.66, indicating a 29% and a 30% increase in Jsc and η, respectively, compared to that of a DSSC based on pure TiO2 photoanode, which exhibits a η value of 5.76% with a Jsc of 11.85mAcm−2, a Voc of 0.74V, and a FF of 0.66. The introduction of the RGO/TiO2 blocking layer in the photoanode could really enhance the efficiency of DSSC by preventing the direct contact between the electrolyte and the FTO glass surface.

Photoconductivity Enhancement of Reduced Graphene Oxide with Reduced Oxide Graphene Quantum Dots Hybrids Film

Water Soluble Reduced Graphene Oxide As an Efficient Photoluminescence Quencher for Semiconductor Quantum Dots

Hybrid Reduced Graphene Oxide/tio2/graphitic Carbon Nitride Composites with Improved Photocatalytic Activity for Organic Pollutant Degradation

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Synthesis and optoelectronic properties of reduced graphene oxide/InP quantum dot hybrids

Silicon Nanowires/reduced Graphene Oxide Composites for Enhanced Photoelectrochemical Properties.

Surface modification of TiO 2 photoanode in dye-sensitized solar cells using reduced graphene oxide: A computational and experimental study

A one-pot synthesis of reduced graphene oxide-Cu₂S quantum dot hybrids for optoelectronic devices.

Construction of a direct Z-scheme ZnS quantum dot (QD)-Fe<sub>2</sub>O<sub>3</sub> QD heterojunction/reduced graphene oxide nanocomposite with enhanced photocatalytic activity

Reduction of Graphene Oxide by an In-Situ Photoelectrochemical Method in a Dye-Sensitized Solar Cell Assembly

Wo3-Reduced Graphene Oxide Composites with Enhanced Charge Transfer for Photoelectrochemical Conversion

Unusual enhancement in efficiency of DSSCs upon modifying photoanodes with reduced graphene oxide

Preparation of Graphene/Polymer Composite Photocathode for Qdssc

A Hybrid Catalyst Composed of Reduced Graphene Oxide/cu2s Quantum Dots As a Transparent Counter Electrode for Dye Sensitized Solar Cells

Facile One-Pot Synthesis of Ternary Copper-Tin-Chalcogenide Quantum Dots on Reduced Graphene Oxide for Enhanced Photocatalytic Activity

Graphene-CdS quantum dots-polyoxometalate composite films for efficient photoelectrochemical water splitting and pollutant degradation.

Highly catalytic reduced graphene oxide decorated Cu 2 S counter electrode boosting quantum dot – sensitized solar cell performance

Highly Conductive Free-Standing Reduced Graphene Oxide Thin Films for Fast Photoelectric Devices

Enhanced Photochemical Oxidation Ability of Carbon Nitride Byπ–πstacking Interactions with Graphene

Synergistic Effect of Polyoxometalates and Rgo for Enhancing the Photocurrents of TiO2 Based Composite Film