Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.

Facile Synthesis of Cubic-Phase Lithium Tungsten Oxide and Its Application in Lithium Storage

Facile Synthesis of Porous Co3O4 Nanosheets Containing Abundant Oxygen Vacancies for Boosted Lithium-Ion Storage

Synthesis and Properties of Lithum-Ion Battery Cathode Material LiW_xV_3O_8

In Situ Synthesis of Carbon Incorporated Tio2 with Long-Term Performance As Anode for Lithium-Ion Batteries

Cobalt sulfide nanoparticles restricted in 3D hollow cobalt tungstate nitrogen-doped carbon frameworks incubating stable interfaces for Li-ion storage

Synthesis of carbon-SiO2 hybrid layer @ SiO2 @ CNT coaxial nanotube and its application in lithium storage

Walnut-like Porous Core/Shell TiO2 with Hybridized Phases Enabling Fast and Stable Lithium Storage

Formation of highly porous CuCo2O4 nanosheet assemblies for high-rate and long-term lithium storage

Synthesis of Co2V2O7 Hollow Cylinders with Enhanced Lithium Storage Properties Using H2O2 As an Etching Agent

Solid-State Synthesis of Graphite Carbon-Coated Li4ti5o12 Anode for Lithium Ion Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Synthesis of Porous CoFe2O4 Octahedral Structures and Studies on Electrochemical Li Storage Behavior

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Watermelon-Like Structured SiOx-TiO2@C Nanocomposite As a High-Performance Lithium-Ion Battery Anode

Quick one-pot synthesis of amorphous carbon-coated cobalt–ferrite twin elliptical frustums for enhanced lithium storage capability

Sandwich-Like Carbon-Anchored Ultrathin Tio2 Nanosheets Realizing Ultrafast Lithium Storage

Carbon-coated Li4Ti5O12–TiO2 Microspheres As Anode Materials for Lithium Ion Batteries

One-Step Synthesis of Carbon-Coated Tin Dioxide Nanoparticles for High Lithium Storage

Cu-Li2o@Si Core-Shell Nanowall Arrays: Facile Voltage-Controlled Synthesis and Enhanced Lithium-Storage Capabilities

Facile synthesis and lithium storage properties of a porous NiSi2/Si/carbon composite anode material for lithium-ion batteries