Abstract:The purpose of this present study is to address instability flowing characteristics and mechanism of the water-entry cavity created by a semi-closed cylinder. For this purpose, an experimental study and a numerical study of the water-entry of a semi-closed cylinder are carried out. According to the results of the experiments and comparison, the cavitating flows between the semi-closed cylinder water entry and the sealing cylinder water entry, and the fluctuation flow pattern form of the semi-closed cylinder cavitation is found around the body. The flow characteristics of the cavity shape are gained by analyzing the image data. A further insight into the mechanisms of perturbation to the flow structure and the cavity fluctuation by the air in the opening cell are studied based on the law of conservation of energy in water entry. According to the results of simulation and comparison with the cavity visualization of experiment, three instability flow phenomena of cavity are formed during the different stages of water-entry, i.e., flow separation destroyed, local flow transformed near cavity, and unique cavity shedding pattern. A further insight into the characteristics of the flow and the distribution of pressure and velocity during the stage of the cavity unstabilized flow is gained. Finally, the formation mechanism of the cavity unstabilized flow is studied based on the boundary layer theory and Helmhotz vortex theory. The obtained results show that the water poured into the cell of cylinder after the opening end has impacted free surface causes the internal air to compress and expand, and as a consequence of these effects, periodic disturbances of flow structure occur around the cavity, then the cavity presents an identical periodic wave flow with air piston motion and the flow stability of cavity is destroyed. At the eve of impacting, the opening end approaches the free surface, which leads to the inflow velocity attenuation rapidly and the pressure increasing in the cell, which creates an initial pressure higher than ambient pressure. Because of the high pressure, air efflux from the cell forms a gas jet injected into the cavity for the first air expansion stage, then the detaching flow is destroyed and the cavity extension diameter is enlarged. The flow in the gas-liquid mixing domain of cavity is seen as an approximate boundary layer flow pattern where favorable pressure gradient on the upwind side and adverse pressure gradient on the lee side appear alternately. As this flow pattern, re-entrant flow acting on the trough of wave cavitation results in the fact that the laminar-turbulent transition is weakened in the trough field and the local gas-liquid mixing domain is thickened to be involved in unstabilized structure as cloud cavitation. The wave cavity presents a partial and multiple shedding pattern occurring at the trough positions in sequence. There is no mutual interference between shedding cavity and the main cavity. Following the cavity shedding, vortex shedding is formed. The vorticity concentrates on the inside of shedding cavity, and the pressure and velocity present a coherent structure.

Probing and imaging of vapor-water mixture properties inside partial/cloud cavitating flows

Experimental Investigation of Ventilated Partial Cavitation

Phase-resolved Characteristics of Bubbles in Cloud Cavitation Shedding Cycles

Experimental and Numerical Investigation on the Cavity Regime and Drag Reduction of Ventilated Partial Cavity

Experimental Investigation on the Cavity Evolution and Dynamics with Special Emphasis on the Development Stage of Ventilated Partial Cavitating Flow

Numerical investigation of cavitation vortex dynamics in different cavitation patterns coupled implicit large eddy simulation and boundary data immersion method

Modeling the Distribution Characteristics of Vapor Bubbles in Cavitating Flows

Bubble Size Distribution at Early Stage of Hydrodynamic Cloud Cavitation

An Experimental Study of Water-Entry Cavitating Flows of an End-Closed Cylindrical Shell Based on the High-Speed Imaging Technology

Experimental Research On The Unsteady Characteristic Of Cavitating Flow

Thermodynamic effects at Venturi cavitation in different liquids

Spatial-temporal Features of the Coherent Structure of Sheet/cloud Cavitation Flows Using a Frequency-Weighted Dynamic Mode Decomposition Approach

Dynamic characteristics of the cavitation clouds of submerged Helmholtz self-sustained oscillation jets from high-speed photography

Investigation into the behaviors of ventilated supercavities in unsteady flow

Experimental Investigation of Two Ventilated Cavities with Effect of Froude Number and Gas Entrainment

Experimental Study on the Unsteady Natural Cloud Cavities: Influence of Cavitation Number on Cavity Evolution and Pressure Pulsations

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity

Local Void Fractions and Bubble Velocity in Vertical Air-Water Two-Phase Flows Measured by Needle-Contact Capacitance Probe

A Discontinuous Cavitation Model (DCM)

Experimental Investigation of Turbulent Cavitating Flows in a Small Venturi Nozzle

Experimental and Numerical Investigation on the Flow Structure and Instability of Water-Entry Cavity by a Semi-Closed Cylinder