Abstract:Controlling band gaps of phononic crystals in real time through external stimuli (e.g. mechanical loadings, electric fields, and magnetic fields) shows potential applications in adaptive acoustic devices. It has been indicated that alteration of structural geometry or effective material properties due to external mechanical loadings will effectively change the bandgaps. In this regard, inducing significant post-buckling deformations in phononic crystals becomes an effective way to tune the band gaps. Few studies however have been reported to tune the band gaps through small deformations under which the geometry of phononic crystals is almost unchanged. In this work, a phononic crystal plate made of soft material with resonant units is proposed. Each resonant unit consists of a mass which is connected to the perforated plate by thin beams. Finite element method is employed to study the deformation and the dispersion behavior of such structure when subject to external mechanical loadings. Obvious complete band gaps are found to even exist in the intact structure without any mechanical loading. The evolution of band gaps under stretching is systematically revealed. Results show that remarkable tunability of bandgaps with small pre-stretch or extension is realized when strong resonance appears for some particular modes. The resonance frequency is mainly affected by the mass of the resonator and the stiffness of the connecting beams. In the proposed structure, the stiffness of the connecting beams can be substantially increased under a small pre-stretch. As a result, the resonance frequencies of resonant modes are increased, giving rise to a remarkable modification of the band gaps, while the geometry of the structure is nearly unchanged.

Study on the Band Gaps of Phononic Crystal Pipes with Alternating Materials in the Radial and Axial Directions

Experimental and Theoretical Investigation of Lowering the Band Gaps of Phononic Crystal Beams Through Fluid-Solid Coupling

Phononic Crystal Pipe with Periodically Attached Sleeves for Vibration Suppression

Band Gap Properties in Two-Dimensional Phononic Crystal Slabs with Neck Structures

Thermal Tuning of the Interfacial Adhesive Layer on the Band Gaps in a One-Dimensional Phononic Crystal

Bandgap Structures Of Sh-Wave In A One-Dimensional Phononic Crystal With Viscoelastic Interfaces

Large Band Gaps In Two-Dimensional Phononic Crystals With Neck Structures

Flexural–torsional vibration reduction of an eccentric phononic crystal pipe conveying fluid

Tunable Bandgaps in Soft Phononic Plates with Spring-Mass-like Resonators

Thermal tuning of band structures in a one-dimensional phononic crystal

Broadening Band Gaps of Bragg Scattering Phononic Crystal With Graded Supercell Configuration

Analysis of Flexural and Torsional Vibration Band Gaps in Phononic Crystal Beam

Study of Band Gaps of Two-Dimensional Phononic Crystals with Criss-Crossed Elliptical Holes

Experimental study on sound wave band-gap structure of hollow cylinders in air

Study on the Existence of Band Gaps for the Transverse Mode in 2D Piezoelectric Phononic Crystals from a Point View of Connectivity

Low-frequency and Tuning Characteristic of Band Gap in a Symmetrical Double-Sided Locally Resonant Phononic Crystal Plate with Slit Structure

A locally resonant phononic crystal structure with low-frequency broad bandgap

Low-Frequency Bandgap Characterization of a Locally Resonant Pentagonal Phononic Crystal Beam Structure

Multilayer-split-tube Resonators with Low-Frequency Band Gaps in Phononic Crystals

Large Band Gaps in Two-Dimensional Phononic Crystals with Jerusalem Cross Slot Structures

Band gaps in phononic crystals: Generation mechanisms and interaction effects