Abstract:Controlling band gaps of phononic crystals in real time through external stimuli (e.g. mechanical loadings, electric fields, and magnetic fields) shows potential applications in adaptive acoustic devices. It has been indicated that alteration of structural geometry or effective material properties due to external mechanical loadings will effectively change the bandgaps. In this regard, inducing significant post-buckling deformations in phononic crystals becomes an effective way to tune the band gaps. Few studies however have been reported to tune the band gaps through small deformations under which the geometry of phononic crystals is almost unchanged. In this work, a phononic crystal plate made of soft material with resonant units is proposed. Each resonant unit consists of a mass which is connected to the perforated plate by thin beams. Finite element method is employed to study the deformation and the dispersion behavior of such structure when subject to external mechanical loadings. Obvious complete band gaps are found to even exist in the intact structure without any mechanical loading. The evolution of band gaps under stretching is systematically revealed. Results show that remarkable tunability of bandgaps with small pre-stretch or extension is realized when strong resonance appears for some particular modes. The resonance frequency is mainly affected by the mass of the resonator and the stiffness of the connecting beams. In the proposed structure, the stiffness of the connecting beams can be substantially increased under a small pre-stretch. As a result, the resonance frequencies of resonant modes are increased, giving rise to a remarkable modification of the band gaps, while the geometry of the structure is nearly unchanged.

Study of Band Gaps of Two-Dimensional Phononic Crystals with Criss-Crossed Elliptical Holes

Exact Solution to Band Structures of One-Dimensional Viscoelastic Functionally Graded Phononic Crystals

Multi-band Design for One-Dimensional Phononic Crystals

Robustly Tuning Bandgaps in Two-Dimensional Soft Phononic Crystals with Criss-Crossed Elliptical Holes

Thermal Tuning of the Interfacial Adhesive Layer on the Band Gaps in a One-Dimensional Phononic Crystal

Bandgap Structures Of Sh-Wave In A One-Dimensional Phononic Crystal With Viscoelastic Interfaces

Study on Elastic Wave Band Gap Excitation of Phononic Crystal at Ultra-Low Filling Rate

Band gaps in phononic crystals: Generation mechanisms and interaction effects

Large One-Dimensional Band Gaps in Three-Component Phononic Crystals Plates

Thermal tuning of band structures in a one-dimensional phononic crystal

Effects of void geometry on two-dimensional monolithic porous phononic crystals

Tunable Bandgaps in Soft Phononic Plates with Spring-Mass-like Resonators

Band gaps of elastic waves in 1-D dielectric phononic crystal with the flexoelectric and strain gradient effects consideration

Study on the band gap variation caused by constructed materials in a sandwich phononic crystal

Tunable characteristics of low-frequency bandgaps in two-dimensional multivibrator phononic crystal plates under prestrain

Analysis of Flexural and Torsional Vibration Band Gaps in Phononic Crystal Beam

Tunability of longitudinal wave band gaps in one dimensional phononic crystal with magnetostrictive material

Harnessing Uniaxial Tension to Tune Poisson's Ratio and Wave Propagation in Soft Porous Phononic Crystals: an Experimental Study

Experimental study on sound wave band-gap structure of hollow cylinders in air

Waveguiding inside the complete band gap of a phononic crystal slab

Phonon propagation dynamics in band-engineered one-dimensional phononic crystal waveguides