Abstract:On the basis of damage mechanics, a 2D fracture propagation model for seepage-stress-damage coupling in multi-fracture shales was established. Numerical simulations of hydraulic fracture propagation in the presence of natural fractures were carried out, with the use of mechanical parameters of shale reservoirs. The results showed that when hydraulic fractures encountered natural fractures in a shale reservoir, the morphology of fracture propagation was jointly affected by the properties of natural fractures (permeability and mechanical properties of rocks), approaching angle, horizontal stress difference, and flow rate of fracturing fluids. At a small horizontal stress difference, or low approaching angle, or small friction coefficient, natural fractures had increased potential to be damaged due to shear and tension. In such cases, the hydraulic fractures tended to propagate along the natural fractures. As the flow rate of fracturing fluid increased and the width of hydraulic fractures expanded, branch fractures formed easily when the net pressure exceeded the sum of horizontal stress difference and tensile strength of the rocks in which natural fractures with approaching angle smaller than 60° existed. It is seen, a high flow rate will increase the complexity of fracture network. However, when a large number of natural fractures with approaching angles greater than 60° existed, a large flow rate generally led to propagation of hydraulic fractures beyond natural fractures, which was not favored. Hence, an appropriate flow rate should be selected based on the orientations of natural fractures and hydraulic fractures. At the early stage of hydraulic fracturing, a low flow rate was favorable for the initiation of natural fractures and the growth of complexity of regional fractures near the well. Later, a higher flow rate facilitated a further propagation of hydraulic fractures into the depth of reservoir, thus forming a network of fractures. The underlying control mechanism of flow rate and net pressure on the formation of fracture network still requires clarification. The bending degree of the fracture propagation path depended on the ratio of net pressure to stress difference at a distant point as well as on the spacing between fractures. When the horizontal stress difference (<9 MPa) or coefficient of horizontal stress difference (<0.25) was low, the ratio of net pressure to stress difference was high. In this case, the fracture-induced stress obtained an enhanced significance, while the interactions of hydraulic fractures intensified, leading to a non-planar propagation of fractures. In addition, a smaller spacing between fractures caused intensified interactions of hydraulic fractures, so the propagation path altered more easily. This work contributes to the prediction of morphology of fracture propagation in unconventional oil and gas reservoirs.

Coupled Flow, Stress and Damage Modelling of Interactions Between Hydraulic Fractures and Natural Fractures in Shale Gas Reservoirs

Development of coupled fluid-flow/geomechanics model considering storage and transport mechanism in shale gas reservoirs with complex fracture morphology

Modeling of Geomechanics and Fluid Flow in Fractured Shale Reservoirs with Deformable Multi-Continuum Matrix

3D NUMERICAL INVESTIGATION OF HYDRAULIC FRACTURE NETWORK PROPAGATION IN A SHALE GAS RESERVOIR WITH NATURAL AND LAYERED DISCONTINUITIES UNDER FULLY HYDROMECHANICAL COUPLING

Study on the Interaction Mechanism of Hydraulic Fracture and Natural Fracture in Shale Formation

Modeling Hydraulic Fracturing Induced Fracture Networks in Shale Gas Reservoirs As a Dual Porosity System

Poromechanical Modeling and Numerical Simulation of Hydraulic Fracture Propagation.

Pore-Scale Simulation of Fracture Propagation by CO2 Flow Induced in Deep Shale Based on Hydro-Mechanical Coupled Model

Numerical Simulations of Fracture Propagation in Jointed Shale Reservoirs under CO2 Fracturing

A Comprehensive Model Coupling Embedded Discrete Fractures, Multiple Interacting Continua, and Geomechanics in Shale Gas Reservoirs with Multiscale Fractures

Numerical study of hydraulic fracturing on single-hole shale under fluid–solid coupling

Study on the 3D Fluid-Solid Coupling Model with Multi-Pressure System of Shale

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

A semi-analytical model for coupled flow in stress-sensitive multi-scale shale reservoirs with fractal characteristics

Numerical simulation of hydraulic fracture propagation in shale gas reservoir

The Role of Natural Fracture Activation in Hydraulic Fracturing for Deep Unconventional Geo-Energy Reservoir Stimulation

Numerical Investigation of Interaction Mechanism between Hydraulic Fracture and Natural Karst Cave Based on Seepage-Stress-Damage Coupled Model

A new extended finite element model for gas flow in shale gas reservoirs with complex fracture networks

Numerical Study of the Effect of Natural Fractures on Shale Hydraulic Fracturing Based on the Continuum Approach

Fracture Characterization Using Flowback Water Transients from Hydraulically Fractured Shale Gas Wells

A hydro-mechanical-damage fully coupled cohesive phase field model for complicated fracking simulations in poroelastic media