Abstract:The formation of the gigaseal, a giga Omega-scale seal between the micropipette electrode and cell surface, is the keystone to measure the extremely weak electric signals of cell ion channels in patch clamp technique. To determine a point on the cell surface facilitating gigaseal formation, 3-D cell morphology information is required. However, the current 3-D cell morphology measurement methods relying on special devices or easily causing clogging issues of the micropipette electrode due to contact on cells are usually not applicable in the traditional patch clamp system. Addressing this, a noninvasive 3-D cell morphology measurement method was developed in this article for robotic patch clamp with a higher success rate of gigaseal formation. First, the measured bath impedance of the micropipette electrode was modeled and then utilized to measure the cell surface height noninvasively. Using the measured cell surface heights at key positions, the 3-D cell morphology was fitted to determine a contact position on the cell surface to facilitate gigaseal formation. Finally, a robotic whole-patch clamp process was conducted at the determined contact position. Experimental results demonstrated that 100% and 90% success rates of noninvasive 3-D cell morphology measurements were achieved on the cultured human embryonic kindey (HEK)-293 cells and pyramidal neurons in mouse brain slices, respectively, with an average measurement error of cell surface height less than . At the determined contact position, significant improvements in success rates of gigaseal formation and whole-cell patch clamp operation were achieved in comparison to the results at the positions recommended in related work. Our research may spike inspiration to improve the success rates of gigaseal formation and patch clamp operation based on 3-D cell morphologies.

The Effect of Pipette Tip Roughness on Giga-seal Formation

Study of the Tip Surface Morphology of Glass Micropipettes and Its Effects on Giga-Seal Formation

Experimental and simulation study of the effect of pipette roughness on giga-seal formation in patch clamping

Characterization of Surface Properties of Glass Micropipettes Using SEM Stereoscopic Technique

Surface Properties of Glass Micropipettes and Their Effect on Biological Studies

A benchmark study with sealchip planar patch-clamp technology.

Polished nanopipets: new probes for high-resolution scanning electrochemical microscopy.

Open Carbon Nanopipettes As Resistive-Pulse Sensors, Rectification Sensors, and Electrochemical Nanoprobes.

Resistive-pulse and Rectification Sensing with Glass and Carbon Nanopipettes

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Robotic Patch Clamp Based on Noninvasive 3-D Cell Morphology Measurement for Higher Success Rate

Flip-the-tip: automated patch clamping based on glass electrodes

Studies of Ionic Current Rectification Using Polyethyleneimines Coated Glass Nanopipettes.

Fabrication and characterization of submicrometer- and nanometer-sized double-barrel pipets.

Cleaning patch-clamp pipettes for immediate reuse

Microdeposition of 3D Structure on F Ilm Surface Using Micropipette

Preparation and detection of pipettes for microinjection

Method to improve the micropipette accuracy of full-automatic ELISA system

Optimization of Micropipette Fabrication by Laser Micromachining for Application in an Ultrafine Atmospheric Pressure Plasma Jet Using Response Surface Methodology

Immediate reuse of patch-clamp pipettes after ultrasonic cleaning

Probing Rapid Ion Transfer Across a Nanoscopic Liquid−Liquid Interface