Abstract:<p>We propose a hydraulically assisted eddy-current etching method for the controllable fabrication of pico/femtoliter sampling probes with equal inner diameters along the length of the probe. The relative standard deviations of the outer and inner diameters (O.D. and I.D., respectively) of several 1.07-μm-I.D. sampling probe tips fabricated in a single batch using this method were 2.2% and 2.8%, respectively, and the average O.D./I.D. ratio of these probes was 1.17. The probe fabrication method has high reproducibility, and sharp tips are produced, which is advantageous for the transfer of ultra-small sample volumes. Further, the narrow, equal diameter, cylindrical inner bore allows the online, visual determination of the pipetted sample volume by utilizing a microscopic imaging system to measure the liquid length. This value is converted linearly to the pipetted volume, whose measurement error is on a sub-pixel level. Image-based sampling using the fabricated probes was achieved by connecting the probe to an electroosmotic pump, which allowed the controlled pipetting of pico/femtoliter samples. Because the pipette allows samples of the same volume to be measured accurately, the pipette was applied for the semiquantitative mass spectrometry analysis of the metabolites in individual epidermal cells sampled from different parts of <em>Portulaca oleracea</em> plants. The results show that different types of cells have distinct metabolite profiles. Further, the experiments showed that, in dopamine-rich leaves, the content of dopamine in the petioles is higher than that in the foliage. The probe fabrication strategy opens new avenues for the controllable pipetting of ultra-small volume samples and the realization of the visual pipetting of pico/femtoliter samples.</p>

Fabrication and characterization of submicrometer- and nanometer-sized double-barrel pipets.

Open Carbon Nanopipettes As Resistive-Pulse Sensors, Rectification Sensors, and Electrochemical Nanoprobes.

Studies on Charge Transfer Across the Micro-Liquid/Liquid Interface Supported at A Double-Barrel Micropipette

Resistive-pulse and Rectification Sensing with Glass and Carbon Nanopipettes

Polished nanopipets: new probes for high-resolution scanning electrochemical microscopy.

Fabrication and Use of Nanopipettes in Chemical Analysis.

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Simulation and experimental verification of the dependence of collection efficiency on the shape of a dual micropipette

Investigation of Transfer Behavior of Protonated Pyridine at the Liquid/liquid Interface Using Dual Micropipettes

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Dotette: Programmable, High-Precision, Plug-and-play Droplet Pipetting.

Development of a New Lightweight Multi-Channel Micro-Pipette Device

A high-precision automated liquid pipetting device with an interchangeable tip

Controllable fabrication of pico/femtoliter pipette sampling probes and visual sample volume determination

A Confined Nanopipette: From Fundamental to Application

High-precision digital droplet pipetting enabled by a plug-and-play microfluidic pipetting chip.

Nanopipettes for single nanobubble electrochemical analysis: Fundamentals and applications

Manipulating Femtoliter to Picoliter Droplets by Pins for Single Cell Analysis and Quantitative Biological Assay.

Characterization of Surface Properties of Glass Micropipettes Using SEM Stereoscopic Technique

Direct fabrication of single nanopore in glass capillary

Optimization of Micropipette Fabrication by Laser Micromachining for Application in an Ultrafine Atmospheric Pressure Plasma Jet Using Response Surface Methodology