Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Double Glass Transitions in Exfoliated Poly(methyl Methacrylate)/organically Modified MgAl Layered Double Hydroxide Nanocomposites

Poly(L-Lactide)/Layered Double Hydroxides Nanocomposites: Preparation and Crystallization Behavior

Preparation of Poly(Methylmethacrylate)/Layered Double Hydroxides Nanocomposites Via in Situ Solution Polymerization

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Glass Transitions of Poly(Methyl Methacrylate) Confined in Nanopores: Conversion of Three- and Two-Layer Models

Co-Continuous Polymeric Nanostructures Via Simple Melt Mixing of Ps/Pmma

Exfoliated Poly(methyl Methacrylate)/mgfe-Layered Double Hydroxide Nanocomposites with Small Inorganic Loading and Enhanced Properties

Preparation of Poly (methyl Methacrylate)/ldh Nanocomposite by Exfoliation-Adsorption Process

In situ synthesis of poly(methyl methacrylate)/MgAl layered double hydroxide nanocomposite with high transparency and enhanced thermal properties

Double Glass Transition Temperatures of Poly(Methyl Methacrylate) Confined in Alumina Nanotube Templates

Structural characterization and thermal and mechanical properties of poly(propylene carbonate)/MgAl-LDH exfoliation nanocomposite via solution intercalation

The Intercalation of Poly(methyl Methacrylate)/aluminophosphate Nanocomposites and the Properties Improvement

Double Glass Transitions and Interfacial Immobilized Layer in In-Situ-Synthesized Poly(Vinyl Alcohol)/Silica Nanocomposites

Glass Transition of Poly (methyl Methacrylate) Filled with Nanosilica and Core-Shell Structured Silica

Synthesis And Characterization Of Pe-G-Ma/Mgal-Ldh Exfoliation Nanocomposite Via Solution Intercalation

Structural Characteristics and Thermal Properties of Pe-G-Ma/Mgal-Ldh Exfoliation Nanocomposites Synthesized by Solution Intercalation

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Stabilization of Poly(methyl Methacrylate) Nanofibers with Core–Shell Structures Confined in AAO Templates by the Balance Between Geometric Curvature, Interfacial Interactions, and Cooling Rate

Crystallization Behavior and Thermal Properties of PP/MgAl LDH Nanocomposites Prepared in Non-polar Solution

Structural characterization and thermal oxidation properties of LLDPE/MgAl-LDH nanocomposites

Structural characteristics and interfacial relaxation of nanocomposites based on polystyrene and modified layered double hydroxides