Abstract:As lithium-ion batteries find use in high energy and power applications, such as in electric and hybrid-electric vehicles, monitoring the degradation and subsequent safety issues becomes increasingly important. In a Li-ion cell setup, the voltage measurement across the positive and negative terminals inherently includes the effect of the cathode and anode which are coupled and sum to the total cell performance. Accordingly, the ability to monitor the degradation aspects associated with a specific electrode is extremely difficult because the electrodes are fundamentally coupled. A three-electrode setup can overcome this problem. By introducing a third (reference) electrode, the influence of each electrode can be decoupled, and the electrochemical properties can be measured independently. The reference electrode (RE) must have a stable potential that can then be calibrated against a known reference, for example, lithium metal. The three-electrode cell can be used to run electrochemical tests such as cycling, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS). Three-electrode cell EIS measurements can elucidate the contribution of individual electrode impedance to the full cell. In addition, monitoring the anode potential allows the detection of electrodeposition due to lithium plating, which can cause safety concerns. This is especially important for the fast charging of Li-ion batteries in electric vehicles. In order to monitor and characterize the safety and degradation aspects of an electrochemical cell, a three-electrode setup can prove invaluable. This paper aims to provide a guide to constructing a three-electrode coin cell setup using the 2032-coin cell architecture, which is easy to produce, reliable, and cost-effective.

Electrochemical Behaviors in Closed Bipolar System with Three-Electrode Driving Mode

Visualizing the Zero-Potential Line of Bipolar Electrodes with Arbitrary Geometry.

Bipolar Electrochemistry – A Powerful Tool for Micro/Nano‐Electrochemistry

Potential Modulation and Control of Redox Reactions at Bipolar Electrodes Using an Ion-Selective Membrane

Alternate reporting surfaces in closed bipolar electrode system: A strategy forelectrochemiluminescence sensing of both redox processes

Electrosynthesis with split-bipolar electrodes

Ph-Differential Design and Operation of Electrochemical and Photoelectrochemical Systems with Bipolar Membrane

Multidimensional Modelling Of Polymer Electrolyte Fuel Cells Under A Current Density Boundary Condition

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Creating a bipolar electrode system for electrochemical advanced oxidative processes with efficient electricity consumption

Fluorescence-Based Observation of Transient Electrochemical and Electrokinetic Effects at Nanoconfined Bipolar Electrodes

Bipolar Electrodes for Next-Generation Rechargeable Batteries

Transient Mechanism Analysis of Three-Dimensional Zinc-Nickel Single Flow Battery Based on Different Negative Electrode Structures

Three-electrode Coin Cell Preparation and Electrodeposition Analytics for Lithium-ion Batteries

Electrochemical reactions coupled multiphysics modeling for lithium ion battery with non-heterogeneous micro-scale electrodes structures

ELECTROCHEMICAL DECOMPOSITION OF POTASSIUM CYANIDE USING BIPOLAR ELECTRODES

A Numerical Study on Ion Concentration Polarization and Electric Circuit Performance of an Electrokinetic Battery.

Recent advances on materials and technologies of composite bipolar plate for proton exchange membrane fuel cell

A Closed Bipolar Electrochemical Cell for the Interrogation of BDD Single Particles: Electrochemical Advanced Oxidation

A Comparative Study of Three Electrochemical Battery Models with Different Operating Conditions

Enhanced Corrosion Resistance and Interfacial Conductivity of TiCx/a-C Nanolayered Coatings Via Synergy of Substrate Bias Voltage for Bipolar Plates Applications in PEMFCs