Abstract:Lithium-ion batteries (LIB) are now the most widely used secondary battery systems for portable electronic devices due to the highest gravimetric and volumetric energy densities. The potential use of LIB in hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV) applications make is attracting more and more attention of research for new materials for LIB. The most widely used anodes in current LIB are carbon based materials, which can deliver about 350 mAh/g capacity with relatively good rate performance. In order to meet the requirement of high volumetric energy densities in HEV and PHEV applications, the search of high capacity materials is intensifying. Silicon based anodes are particularly attractive alternatives to carbon with extremely high gravimetric energy densities (theoretic capacity: 4200 mA hg) [1, 2]. Great efforts have been made to study structural changes of Si anode materials during lithiation and de-lithiation. However, the series of crystalline lithium silicides phases [3,4] , known in binary phase diagram of Li-Si system, could not be observed at room temperature due to the formation of amorphous Lix-Si alloy [5,6] , until a deep discharge state is reached where a metastable Li15Si4 phase is formed [7]. Therefore, except NMR technique [8, 9], it is difficult to investigate the structural changes of Si anode materials during Li insertion and extraction by conventional methods. X-ray absorption spectroscopy (XAS) has been used widely to investigate materials in lithium ion batteries. It can provide useful information about valence state and local stricture of the absorbing elements of the material. Absorption energy of Si K-edge is 1839 eV, higher than normal soft x-ray region, also at low end of hard x-ray region. Therefore, it is quite difficult to do ex situ and in-situ XAS experiments. In this presentation, the results of ex-situ and in-situ X-ray absorption (XAS) studies at Si K-edge of Si and Si/C anode materials during Li insertion and extraction, both in the bulk and at the surface structure during electrochemical cycling will be reported. Density functional theory (DFT) calculation was also applied to calculate the electronic structure of different Li-Si alloys for simulating the XANES spectra. The work at Brookhaven National Lab. was supported by the U.S. Department of Energy, the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies, under the Vehicle Technology Program, under Contract Number DEAC02-98CH10886. The work at Institute of Physics, was supported by CAS (KJCX2-YW-W26). “973” project (2012CB932900) of China. The technic support of Dr. Paul Northrup at X15A beamline of the National Synchrotron Light Source (NSLS), at Brookhaven National Laboratory (BNL) is greatly appreciated.

Dependence of Thermal Stability of Lithiated Si on Particle Size

Atomistic Insights into the Thermal Transport Properties of Inorganic Components of Solid Electrolyte Interphase (SEI) in Lithium-Ion Batteries

Thermal stability of solid electrolyte interphase of lithium-ion batteries

Regulation of Si Nanodomain Size and Its Effect on Electrochemical Performance in Prelithiated SiO Anode

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Interface Engineering to Boost Thermal Safety of Microsized Silicon Anodes in Lithium-Ion Batteries

Controlling of the Ratio of Submicron Particles and Size Effects in SiO Anode for Li-ion Batteries

Enabling the thermal stability of solid electrolyte interphase in Li‐ion battery

Thermal Stability of Sulfide Solid Electrolyte with Lithium Metal

Stability of Solid Electrolyte Interphase Components on Lithium Metal and Reactive Anode Material Surfaces

Thermal Safety Evaluation of Silane Polymer Compounds as Electrolyte Additives for Silicon-Based Anode Lithium-Ion Batteries

Effect of temperature on formation and evolution of solid electrolyte interphase on Si@Graphite@C anodes

In Situ Detecting Thermal Stability of Solid Electrolyte Interphase (SEI)

Thermal Stability of the Solid Electrolyte Interface on Carbon Electrodes of Lithium Batteries

Mechanical Properties and Chemical Reactivity of Li xSiO y Thin Films

The Solid Electrolyte Interphase on Silicon Electrodes Boosts the Stability of Lithium-Ion Batteries

Interface and mechanical degradation mechanisms of the silicon anode in sulfide-based solid-state batteries at high temperatures

Systematic Investigation of Prelithiated SiO2 Particles for High-Performance Anodes in Lithium-Ion Battery

SiO-induced thermal instability and interplay between graphite and SiO in graphite/SiO composite anode

Investigation on Si Anode Materials for Lithium-Ion Batteries Using X-ray Absorption Spectroscopy

Lithiation of Silicon Anode based on Soft X-ray Emission Spectroscopy: A Theoretical Study