Abstract:Discrete dislocation studies have provided a quantitative measure of the dislocation structure and interactional configurational energy density (much of which is stored as GNDs) which is argued to be key to both crack nucleation and growth at the microstructural length scale. This quantity can be captured at the crystal plasticity level as a stored energy density [1]. Experimentally validated modelling provides knowledge of key microstructural quantities (accumulated slip, stress and GND density [2,3]) at experimentally observed fatigue crack nucleation sites and it is shown that while each of these quantities is potentially important in crack nucleation, none of them is in its own right is sufficient to be predictive. However, the local (elastic) critical stored energy density, measured over a length scale determined by the density of GNDs, has been shown to predict crack nucleation sites in single and oligocrystal tests. In addition, once primary nucleated cracks develop and are represented in the XFEM crystal model, the stored energy correctly identifies where secondary fatigue cracks are observed to nucleate in experiments [2]. Studies of R-ratio, nonproportionality and multi-axial stress states in nickel alloys and in 316 steel demonstrate that their effects on fatigue life can be captured with the critical stored energy density. The dislocation configurational energy/stored energy density is also investgated as a mechanistic driver of microstructurally-sensitive fatigue crack growth in ductile metals employing the eXtended Finite Element Method (XFEM) to represent the crack. Microstructural fatigue crack growth is studied in single crystals, bicrystals and in polycrystals of cubic (fcc, bcc) and hexagonal (hcp) structure [4]. Along with the crystallographic slip, the stored energy density is shown to predict microstructurallysensitive crack growth tortuosity, and to capture many features that have been observed experimentally, including crack deflection and retardation at the grain boundaries.

Crystal Plasticity Modelling and HR-DIC Measurement of Slip Activation and Strain Localization in Single and Oligo-Crystal Ni Alloys under Fatigue

Microstructurally-sensitive Fatigue Crack Nucleation in Ni-based Single and Oligo Crystals

A Crystallographic Model for the Orientation Dependence of Low Cyclic Fatigue Property of a Nickel-Base Single Crystal Superalloy

Microcrack Initiation Behavior Around Film Cooling Holes in a Ni-based Single Crystal: in Situ Observation and Crystal Plastic Analysis

Creep-fatigue Behavior of Nickel-Based Single Crystal Superalloy with Different Orientations: Experimental Characterization and Multi-Scale Simulation

Microstructure Characterization and Damage Coupled Constitutive Modeling of Nickel-Based Single-Crystal Alloy with Different Orientations

Thermo-Mechanical Fatigue Constitutive Model for Nickel-Based Single Crystal Superalloys

Heterogeneous Deformation and Damage Mechanisms in Multi-Phase TA15 Ti-alloy: Insights from Experiments Informed Damage-Crystal Plasticity Modelling

Crystal plasticity modeling of non-Schmid yield behavior: from Ni3Al single crystals to Ni-based superalloys

A Crystal Plasticity Phase-Field Model for Microstructure Sensitive Fatigue Crack Growth in a Superalloy

Micro-strain and cyclic slip accumulation in a polycrystalline nickel-based superalloy

Multiscale assesment of microstructurally-sensitive fatigue crack nucleation and growth and their mechanistic drivers

Microstructure-informed, predictive crystal plasticity finite element model of fatigue-dwells

In-situ fatigue behavior study of a nickel-based single-crystal superalloy with different orientations

Microstructure sensitivity of the low cycle fatigue crack initiation mechanisms for the Al 0.3 CoCrFeNi high entropy alloy: in-situ SEM study and crystal plasticity simulation

Cyclic Viscoplastic Deformation Modeling of a Nickel-Based Single Crystal Superalloy with [001] Orientation

High temperature in-situ SEM observation and crystal plasticity simulation on fretting fatigue of Ni-based single crystal superalloys

Crystal plasticity analysis of fatigue-creep behavior at cooling holes in single crystal Nickel based gas turbine blade components

In-situ SEM study of slip-controlled short-crack growth in single-crystal nickel superalloy

Crystal Plasticity Finite Element Method for Slip Systems Evolution Analysis of / Duplex Titanium Alloys during Quasi-Static Tensile Testing

Microplasticity Behavior Study of Equiaxed Near-Β Titanium Alloy under High-Cycle Fatigue Loading: Crystal Plasticity Simulations and Experiments