Abstract:The organic–inorganic hybrids involving epoxy resin and polyhedral oligomeric silsesquioxanes (POSS) were prepared via in situ polymerization of diglycidyl ether of bisphenol A (DGEBA) and 4,4′-diaminodiphenylmethane (DDM) in the presence of the two structurally similar POSS monomers. The organic groups on silsesquioxane cage are aminophenyl and nitrophenyl groups, respectively. The curing reactions were started from the initially homogeneous mixture of DGEBA, DDM and the POSS cages. The inorganic–organic hybrids containing up to 20wt% of POSS were obtained. The morphologies of the resulting hybrids were quite dependent on the types of R groups in the POSS monomers. The phase separation induced by polymerization occurred in the hybrids containing octanitrophenyl POSS (OnpPOSS) and the spherical particles of POSS-rich phase (<0.5 μm in diameter) were uniformly dispersed the continuous epoxy matrix as shown by scanning electronic microscopy. In marked contrast to the OnpPOSS-containing hybrids, the octaaminophenyl POSS (OapPOSS)-containing nanocomposites exhibited a homogeneous morphology. Differential scanning calorimetry and dynamic mechanical analysis showed that the glass transition temperatures (Tg) of the POSS-containing hybrids were lower than that of the control epoxy. The moduli of glass states for the hybrids are significantly higher than that of the control epoxy. For the OapPOSS epoxy nanocomposites the storage moduli of the rubbery plateau were higher than that of the control epoxy when the contents of POSS are less than 20wt%, indicating the nanoreinforcement effect of POSS cages. Thermogravimetric analysis indicates that the thermal stability of the polymer matrix was not much sacrificed by introducing a small amount of POSS, whereas the properties of oxidation resistance of the materials were significantly enhanced. The OapPOSS epoxy nanocomposites displayed more pronounced improvement than the OnpPOSS hybrids, which could be ascribed to the nanoscaled dispersion of POSS cages and the formation of tether structure of POSS cages with epoxy matrix.

The Grafting Reaction of Epoxycyclohexyl Polyhedral Oligomeric Silsesquioxanes with Carboxylic Methoxypolyethylene Glycols and the Properties of Composite Solid Polymer Electrolytes with the Graftomer

Grafting modification of epoxidized natural rubber with poly(ethylene glycol) monomethylether carboxylic acid and ionic conductivity of graft polymer composite electrolytes

Preparation and Characterization of Novel Crosslinked Poly[glycidyl Methacrylate–poly(ethylene Glycol) Methyl Ether Methacrylate] As Gel Polymer Electrolytes

Comb-like Solid Polymer Electrolyte Based on Polyethylene Glycol-Grafted Sulfonated Polyether Ether Ketone

Preparation and characterization of POSS‐SiO2/cyanate ester composites with high performance

One‐Step Polymerizations Enable Facile Construction and Structural Optimization of Graft Copolymer Electrolytes

Polyethylene Glycol Functionalized Polyhedral Cage Silsesquioxane As All Solid-State Polymer Electrolyte for Lithium Metal Batteries

Improvement of Epoxy Resin with Glycidyl-Polyhedral Oligomeric Silsesquioxanes

Structure and Properties of an Organic Rectorite/poly(methyl Methacrylate) Nanocomposite Gel Polymer Electrolyte by in Situ Synthesis

Study on Properties of Gel Polymer Electrolytes Based on Ionic Liquid and Amine‐terminated Butadiene‐acrylonitrile Copolymer Chemically Crosslinked by Polyhedral Oligomeric Silsesquioxane

Multi-sulfonated polyhedral oligosilsesquioxane (POSS) grafted poly(arylene ether sulfone)s for proton conductive membranes

Study of EVOH Based Single Ion Polymer Electrolyte: Composition and Microstructure Effects on the Proton Conductivity

Synthesis of Amphiphilic Poly(phthalazinone Ether Sulfone Ketone ) -Graft -Poly (ethylene Glycol) Graft Copolymers Via Williamson Etherification

All solid-state polymer electrolytes prepared from a hyper-branched graft polymer using atom transfer radical polymerization

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes Via Incorporation of POSS-PEG13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

A novel hybrid functional nanoparticle and its effects on the dielectric, mechanical, and thermal properties of cyanate ester

Passerini polymerization as a novel route for high ionic conductivity solid polymer electrolyte

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes via Incorporation of POSS-PEG 13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

Study on Preparation and Properties of Gel Polymer Electrolytes Based on Comb-Like Copolymer Matrix of Poly(ethylene Glycol) Monomethylether Grafted Carboxylated Butadiene-Acrylonitrile Rubber

In Situ Polymerization Of Methoxy Polyethylene Glycol (350) Monoacrylate And Polyethyleneglycol (200) Dimethacrylate Based Solid-State Polymer Electrolyte For Li-Ion Batteries

Morphology and thermal properties of inorganic–organic hybrids involving epoxy resin and polyhedral oligomeric silsesquioxanes