Abstract:The organic–inorganic hybrids involving epoxy resin and polyhedral oligomeric silsesquioxanes (POSS) were prepared via in situ polymerization of diglycidyl ether of bisphenol A (DGEBA) and 4,4′-diaminodiphenylmethane (DDM) in the presence of the two structurally similar POSS monomers. The organic groups on silsesquioxane cage are aminophenyl and nitrophenyl groups, respectively. The curing reactions were started from the initially homogeneous mixture of DGEBA, DDM and the POSS cages. The inorganic–organic hybrids containing up to 20wt% of POSS were obtained. The morphologies of the resulting hybrids were quite dependent on the types of R groups in the POSS monomers. The phase separation induced by polymerization occurred in the hybrids containing octanitrophenyl POSS (OnpPOSS) and the spherical particles of POSS-rich phase (<0.5 μm in diameter) were uniformly dispersed the continuous epoxy matrix as shown by scanning electronic microscopy. In marked contrast to the OnpPOSS-containing hybrids, the octaaminophenyl POSS (OapPOSS)-containing nanocomposites exhibited a homogeneous morphology. Differential scanning calorimetry and dynamic mechanical analysis showed that the glass transition temperatures (Tg) of the POSS-containing hybrids were lower than that of the control epoxy. The moduli of glass states for the hybrids are significantly higher than that of the control epoxy. For the OapPOSS epoxy nanocomposites the storage moduli of the rubbery plateau were higher than that of the control epoxy when the contents of POSS are less than 20wt%, indicating the nanoreinforcement effect of POSS cages. Thermogravimetric analysis indicates that the thermal stability of the polymer matrix was not much sacrificed by introducing a small amount of POSS, whereas the properties of oxidation resistance of the materials were significantly enhanced. The OapPOSS epoxy nanocomposites displayed more pronounced improvement than the OnpPOSS hybrids, which could be ascribed to the nanoscaled dispersion of POSS cages and the formation of tether structure of POSS cages with epoxy matrix.

A novel hybrid functional nanoparticle and its effects on the dielectric, mechanical, and thermal properties of cyanate ester

Improved Cyanate Resin with Low Dielectric Constant and High Toughness Prepared Using Inorganic–Organic Hybrid Porous Silica

Toughening of POSS–MPS Composites with Low Dielectric Constant Prepared with Structure Controllable Micro/mesoporous Nanoparticles

Improved dielectric and mechanical properties of silica/epoxy resin nanocomposites prepared with a novel organic–inorganic hybrid mesoporous silica: POSS–MPS

Preparation and characterization of POSS‐SiO2/cyanate ester composites with high performance

On preparation and properties of G-POSS/CE hybrid materials

Effect of Surface Functionalization of Molybdenum Disulfide Nanosheets with Polysulfone on Cyanate Ester Nanocomposites

Effects of Novel Polyhedral Oligomeric Silsesquioxane Containing Hydroxyl Group and Epoxy Group on the Dicyclopentadiene Bisphenol Dicyanate Ester Composites

Toughening of Cyanate Resin with Low Dielectric Constant by Glycidyl Polyhedral Oligomeric Silsesquioxane

Controllable confinement nano-reinforced organic-inorganic cyanate ester resin with optimal modulus and dielectric properties trade-offs

Tailoring the cage and functionality of POSS for scalable low-dielectric and tough cyanate ester hybrid resin

Study on preparation and dielectric properties of POSS/CE hybrid composite

Hyperbranched Polysiloxane Functionalization of Graphene Oxide for Improved Mechanical Properties of Cyanate Ester Nanocomposites

Improvement of Epoxy Resin with Glycidyl-Polyhedral Oligomeric Silsesquioxanes

Preparation and Properties Study of G-POSS/EP Hybrid Materials

Novel Si/cyanate Ester Nanocomposites with Multifunctional Properties

Nanostructure of Reactive Polyhedral Oligomeric Silsesquioxane-Based Block Copolymer As Modifier in an Epoxy Network

The Grafting Reaction of Epoxycyclohexyl Polyhedral Oligomeric Silsesquioxanes with Carboxylic Methoxypolyethylene Glycols and the Properties of Composite Solid Polymer Electrolytes with the Graftomer

A Novel Ultra Low-K Nanocomposites of Benzoxazinyl Modified Polyhedral Oligomeric Silsesquioxane and Cyanate Ester

Hybrid Networks Based on Poly(Styrene-Co-Maleic Anhydride) and N-Phenylaminomethyl Poss

Morphology and thermal properties of inorganic–organic hybrids involving epoxy resin and polyhedral oligomeric silsesquioxanes