Abstract:Due to the complex multiscale interaction between intense turbulence and relatively weak flames, turbulent premixed flames in the thin and broken reaction zones regimes exhibit strong finite-rate chemistry and strain effects and are hence challenging to model. In this work, a laboratory premixed jet flame in the broken reaction zone, which has recently been studied using direct numerical simulation (DNS), is modeled using a large eddy simulation (LES)/dynamic thickened flame (DTF) approach with detailed chemistry. The presence of substantial flame thickening due to strong turbulence-chemistry interactions, which can be characterized by a high Karlovitz number (Ka), requires the DTF model to thicken the flame in an adaptive way based on the local resolution of flame scales. Here, an appropriate flame sensor and strain-sensitive flame thickness are used to automatically determine the thickening location and thickening factor, respectively. To account for finite-rate chemistry and strain effects, the chemistry is described in two different ways: (1) detailed chemistry denoted as full transport and chemistry (FTC), and (2) tabulated chemistry based on a strained premixed flamelet (SPF) model. The performance of the augmented LES/DTF approach for modeling the high Ka premixed flame is assessed through detailed a posteriori comparisons with DNS of the same flame. It is found that the LES/DTF/FTC model is capable of reproducing most features of the high Ka turbulent premixed flame including accurate CO and NO prediction. The LES/DTF/SPF model has the potential to capture the impact of strong turbulence on the flame structure and provides reasonable prediction of pollutant emissions at a reasonable computational cost. In order to identify the impact of aerodynamic strain, the turbulent flame structure is analyzed and compared with unstrained and strained premixed flamelet solutions. The results indicate that detailed strain effects should be considered when using tabulated methods to model high Ka premixed flames.

Large Eddy Simulation of Turbulent Combustion by a Dynamic Second-Order Moment Closure Model

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

A-priori and A-Posteriori Studies of a Direct Moment Closure Approach for Turbulent Combustion Using DNS Data of a Premixed Flame

Low Mach number lattice Boltzmann model for turbulent combustion: flow in confined geometries

Large Eddy Simulation of a Turbulent Supercritical Hydrothermal Flame with a Novel Direct Moment Closure Model

Large Eddy Simulation Of The Sandia Flame E And F Using Dynamic Second-Order Moment Closure (Dsmc) Model

Large-eddy Simulation of Premixed Combustion and Validation of the Combustion Model

Large eddy simulation of turbulent partially premixed flames with inhomogeneous inlets using the dynamic second-order moment closure model

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Large Eddy Simulation of Sydney Piloted Jet Flame With Inhomogeneous Inlets Using a Dynamic Second-order Moment Closure Model

Numerical Investigation of Swirl-Stabilized Pulverized Coal Flames in Air and Oxy-Fuel Atmospheres by Means of Large Eddy Simulation Coupled with Tabulated Chemistry

An Improved NO Prediction Model for Large Eddy Simulation of Turbulent Combustion

Algebraic Second Order Moment Model in Large Eddy Simulation of Non-premixed Combustion

Development of SOM Combustion Model for Reynolds-averaged and Large-Eddy Simulation of Turbulent Combustion and Its Validation by DNS

A Generalised Series Model for the LES of Premixed and Non-Premixed Turbulent Combustion

Large-Eddy Simulation of Turbulent Combustion Using Som and Ebu Sgs Combustion Models

A dynamic combustion model for supersonic turbulent combustion

A Review on SOM-LES of Turbulent Two-Phase Combustion

Large-eddy Simulation of Correlation Moments in Turbulent Combustion and Validation of the RANS-SOM Combustion Model

Large eddy simulation of a nonpremixed reacting jet: Application and assessment of subgrid-scale combustion models

Algebraic second-order moment model for simulation of turbulent non-premixed combustion