Abstract:Due to the complex multiscale interaction between intense turbulence and relatively weak flames, turbulent premixed flames in the thin and broken reaction zones regimes exhibit strong finite-rate chemistry and strain effects and are hence challenging to model. In this work, a laboratory premixed jet flame in the broken reaction zone, which has recently been studied using direct numerical simulation (DNS), is modeled using a large eddy simulation (LES)/dynamic thickened flame (DTF) approach with detailed chemistry. The presence of substantial flame thickening due to strong turbulence-chemistry interactions, which can be characterized by a high Karlovitz number (Ka), requires the DTF model to thicken the flame in an adaptive way based on the local resolution of flame scales. Here, an appropriate flame sensor and strain-sensitive flame thickness are used to automatically determine the thickening location and thickening factor, respectively. To account for finite-rate chemistry and strain effects, the chemistry is described in two different ways: (1) detailed chemistry denoted as full transport and chemistry (FTC), and (2) tabulated chemistry based on a strained premixed flamelet (SPF) model. The performance of the augmented LES/DTF approach for modeling the high Ka premixed flame is assessed through detailed a posteriori comparisons with DNS of the same flame. It is found that the LES/DTF/FTC model is capable of reproducing most features of the high Ka turbulent premixed flame including accurate CO and NO prediction. The LES/DTF/SPF model has the potential to capture the impact of strong turbulence on the flame structure and provides reasonable prediction of pollutant emissions at a reasonable computational cost. In order to identify the impact of aerodynamic strain, the turbulent flame structure is analyzed and compared with unstrained and strained premixed flamelet solutions. The results indicate that detailed strain effects should be considered when using tabulated methods to model high Ka premixed flames.

Large-eddy Simulation of Premixed Combustion and Validation of the Combustion Model

Large-Eddy Simulation of Propane-Air Swirling Diffusion Combustion Using SOM Sub-Grid Scale Combustion Model

Large-Eddy Simulation of Premixed Methane/Air Jet Flames

Algebraic Second Order Moment Model in Large Eddy Simulation of Non-premixed Combustion

Performance assessment of flamelet models in flame-resolved LES of a high Karlovitz methane/air stratified premixed jet flame

Large-eddy Simulation of Correlation Moments in Turbulent Combustion and Validation of the RANS-SOM Combustion Model

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Large-Eddy Simulation of Ethanol Spray Combustion Using a SOM Combustion Model

Large-Eddy Simulation of a Swirling Diffusion Flame Using a SOM SGS Combustion Model

Algebraic second-order moment model for simulation of turbulent non-premixed combustion

Experimental Validation Of Large-Eddy Simulation For Swirling Methane-Air Non-Premixed Combustion

Large-Eddy Simulation of Turbulent Combustion Using Som and Ebu Sgs Combustion Models

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Large Eddy Simulation of Turbulent Combustion by a Dynamic Second-Order Moment Closure Model

Comparison Between LES-EBU and RANS-SOM Modeling of Propane-Air Swirling Diffusion Combustion with Annular Fuel Inlet

A Review on SOM-LES of Turbulent Two-Phase Combustion

Development of SOM Combustion Model for Reynolds-averaged and Large-Eddy Simulation of Turbulent Combustion and Its Validation by DNS

Large-eddy Simulation of Ethanol Spray-Air Combustion and Its Experimental Validation

VALIDATION OF SOM TURBULENT COMBUSTION MODEL BY LES

Numerical Investigation of Swirl-Stabilized Pulverized Coal Flames in Air and Oxy-Fuel Atmospheres by Means of Large Eddy Simulation Coupled with Tabulated Chemistry

An Algebraic Sub-Grid Scale Turbulent Combustion Model