Abstract:AC fault disturbance will lead to commutation failure (CF) of LCC-HVDC, which may threaten the security and stability operation of the sending and receiving AC systems. Previous studies have focused on the commutation failure of inverters caused by voltage sags caused by receiving-end AC system faults. Different from the previous studies, this paper comprehensively analyzes the commutation failure mechanism of the inverter caused by a three-phase symmetrical grounding fault at different HVDC sending terminals. Firstly, based on the actual HVDC transmission system parameters, a simulation model is established in the electromagnetic transient simulation platform Hypersim, and the phenomenon of inverter commutation failure caused by sending-end fault is simulated and verified. Secondly, different from the qualitative analysis method used in the past to explain the reasons for CF, the dominant factors that lead to inverter CF under different control modes are investigated by quantitative analysis. In the case of control mode 1, the main reason for CF is that the inverter commutation voltage drops beyond the critical value. In the case of control mode 2, the decrease of the inverter advance angle will increase the risk of inverter CF. At the same time, through the analysis of the relevant electrical quantities before CF, the excessive DC current in the system recovery stage is the root cause of the above phenomenon. On these bases, A control strategy is proposed to suppress the commutation failure caused by the fault at the sending end by adjusting the trigger angle of the rectifier. Electromagnetic transient simulation results show that the proposed control strategy can effectively inhibit CF.

Decreasing the Frequency of HVDC Commutation Failures Caused by Harmonics

A Recovery Method for HVDC Systems Following AC System Faults

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

Prevention and Mitigation of HVDC Commutation Failures: A Review and Future Directions

An Improved Continuous Commutation Failure Mitigation Method in High Voltage Direct Current Transmission System

Design a Fuzzy Controller to Minimize the Effect of HVDC Commutation Failure on Power System

A Combined AC-DC Control Strategy for HVDC Commutation Failure Mitigation

A Study on HVDC Overcurrent During Commutation Failure

DC Additional Control Strategy for Reducing Commutation Failure Duration

Improved Current Order Control Strategy for Effective Mitigation of Commutation Failure in HVDC System

Commutation Failure Mitigation Method Based on Improved Commutation Area in HVDC System

Study on Fault Current Suppression and Commutation Failure in Inverter Side of ±1100 kV DC System

Analysis and suppression of LCC-HVDC inverter commutation failure caused by sending end faults

Commutation Overlap Characteristic Modeling and Stability Analysis of LCC-HVDC in Sending AC Grid

Mechanism and Analysis of HCC to Suppress DC Commutation Failure

A Suppression Strategy for Subsequent Commutation Failures Considering Commutation Capability of Recovery Process

An Enhanced Strategy to Inhibit Commutation Failure in Line-Commutated Converters

A minimum extinction area control strategy to suppress commutation failure in HVDC transmission system

A Fault Current Limiting Approach for Commutation Failure Prevention in LCC-HVDC Transmission Systems

Optimal Power Distribution Method for Wind Farms to Enhance the FRT Capability of the LCC-HVDC System under Commutation Failure

Optimal Power Coordinated Control Strategy for DFIG-Based Wind Farm to Increase Transmission Capacity of the LCC-HVDC System Considering Commutation Failure